The Wandering Woods – Gates and Fences – Hagglethorn Hollow

Name: The Wandering Woods - Gates and Fences - Hagglethorn Hollow
Brand: Age of Sigmar
Availability: InStock

$9.95

Any sales taxes will be calculated in the checkout.

The Wandering Woods Gate and Fences create an impressive barrier to keep the Tree Creatures out of Hagglethorn Hollow. Included are removable flames to fit in the sconces on the fence. The Gates have a hinge join to be assembled with 1.75mm filament.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Wandering Woods Gate and Fences were constructed to keep the Tree-Creatures of the Wandering Woods from devastating the ancient buildings of Hagglethorn Hollow, this wall gate acts as a pen to ensure the curiosity of the docile beasts is kept at a safer distance.

The Wandering Woods Gate and Fences download contains the following folders for different printing options:

Main Folder- A folder containing the model cut into pieces for most conventional FDM 3D printers with a print bed size of 200mm x 200mm x 200mm
Small Printer Cuts- A further cut version of the model for smaller printers with a print bed size of 120mm x 120mm x 120mm
FDM With Supports- A folder containing pre-supported pieces to allow printing without overhangs

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer Reference included in the zip file.
Product measurements can be found in the image gallery.
Copyright Printable Scenery under license from Tabletop Troubadour Games
First Published version 1.5

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	pre-support version included in download., requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Hagglethorn: Garden Fences

Posted on August 20, 2021July 24, 2025 by Mike Los

The Garden Fences from Hagglethorn Hollow add a lot of character to your games and importantly for your troops, they add cover! We’ve used this method on the Common Gardens as well as the fences but it would also be useful for any other wicker or stick surfaces you might come across. Painting these is… Read more

Painting Hagglethorn Hollow: The Waymarkers

Posted on July 30, 2021July 24, 2025 by Mike Los

These characterful statues from the Hagglethorn Hollow Kickstarter provide excellent atmosphere to your gaming table and make great objectives for wargaming. We painted ours in six easy steps that will get them on the table and looking awesome in no time! Step 1) Undercoat in Army Painter Leather Brown Step 2) Drybrush with Army Painter… Read more