The Farm
$11.95
The Farm consists of two stone barns, a small stone shed, an entry arch and a tall wall. These structures were designed as defencable dwellings. The Walls use OpenLOCK clips to hold together.
NOTE – French Farmhouse not included
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing
Available: In stock
Description
NOTE:
- Â The French Farm House is not included.
- The Farm-W15-RPG wall is 152cm.
- The Farm Gate prints upside down
- A separate folder contains the large barn as cut sections
- There are no level 2 floors in the barns
Additional information
| Infill | 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
|---|---|
| Supports | Prints without Supports |
| Layer Height | .2 for Normal Quality (Rcomended) .1 for High Quality |
Q&A
Add a Question
You must be logged in to post a comment.
Niels Laurits Kristensen (verified owner) –
These look awesome!
Would you scale these up 10% like the medieval house for use in stuff like Mordheim og Malifaux?
Matt Barker –
Yes I would scale up by 110% at least. the models are set to 28mm scale (not 28mm heroic)
Ron Weaver (verified owner) –
Which walls need to be printed twice in order to get the setup as pictured above?
Matt Barker –
Use W10 and RW10 for all the walls unless you want a larger farm in which case either use 2 x RW10 or a W15