Shop

Sale!

Europe Bundle

$115.50 $69.00

The Europe Bundle includes:

  • Ruined Chateau
  • Medieval House
  • The Farm
  • Stone Footbridge
  • Modular Town Ruins
  • Church Wall
  • Medieval Church
  • Medieval Church Ruin
  • The Stone Barn
  • French Farmhouse
Available: In stock

1 x Ruined Chateau

The Ruined Chateau is indicative of a European manor house that has been destroyed by heavy gun fire; a grim monument to the savage nature of war. The Ruined Chateau can be printed in either 3 pieces (Floor 1,2 and Roof), or can have the option to print Floor 1 and 2 in two separate pieces. As the set is pre-OpenLOCK, it will need to be glued together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Medieval House

A traditional French Medieval era house. This type of building was constructed during the middle ages, and many still endure even to this day. The Medieval House set comes with one large house (available in Ground, 2nd Floor and Roof) with an option smaller house that can be printed out and attached to the side of the main house. All the pieces will need to be glued together. This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x The Farm

Farms such as these are the mainstay of any rural community, and so must be built to last. The Farm consists of two stone barns, a small stone shed, an entry arch and a tall wall. The Walls use OpenLOCK clips to hold, but the building's walls must be glued together. NOTE - French Farmhouse not included This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Stone Footbridge

The Stone Footbridge is available in two versions. Version A  is the standard version. Version B is for placement in a sunken riverbed.  Please see the product images for clarification.
The bridge can be easily scaled to suit a variety of scenarios.
The bridge should print with supports switched off. However, if you get too much stringing under the middel section of the bridge then you need to switch supports on or increase your 'cooling'
Save Save This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Modular Town Ruins

The Modular Town Ruins are a extensive set of ruin sections.  The ruins are based on the French house ruins so are compatible with our existing French buildings.  Each piece is designed to be configured as a corner ruin using  OpenLOCK clips.  These pieces can be combined in different configurations.
Each piece has an A and B Section.  The 32 pieces create 16 corners which are designed to be mixed and matched.
The small supports in the OpenLOCK port will need to be removed with a screwdriver.
The OpenLOCK clip is included.
Save Save This product will be delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Church Wall

The church Wall is designed to be clipped together with the OpenLOCK clips. Allowing you to make a variety of wall configurations.
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Medieval Church

The Medieval Church is a large model designed to be printed in several sections. It is also compatible with the ruined version of the church. The top parts can be removed and replaced with the Medieval Church Ruin.
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x Medieval Church Ruin

The Medieval Church Ruin is a large model designed to be printed in several sections. It is also compatible with the Medieval church. The top parts can be removed and replaced with the Medieval Church parts.
This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x The Stone Barn

The Stone Barn would be one of the most versatile buildings in our collection.  These structures are common throughout Europe and America. They have been around since before Roman times and will suit many game scenario's.
Save Save This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

1 x French Farmhouse

Farmhouse like these were a common sight through Normandy, and most of France. The French Farmhouse comes in three sections allowing you to build a hovel or two storied farmhouse for use in Bolt Action, Flames of War or even model railways. The scale is set to 28mm so if you want it for Flames Of War, scale it by .6 There is also an option with no inside details. As the product is pre-OpenLOCK, the components will need to be glued together. Save This product is delivered as a .ZIP file pack containing STL files for use on a home 3d Printer. The files are set to 28mm scale but can be rescaled before printing

In stock

Description

Q&A

There are no questions yet.

Be the first to add a question “Europe Bundle”