My Account 
Description
Updates:
- The large versions (uncut) have now ‘boolean flat’ bottoms.
- 23 December 2017 – 1.2 Mesh repair to roofs.
- 29 January 2018- 1.3 A 15mm Scale version has been added.
- 26 November 2018 – 1.4 Update made to the windows.
- 28 January 2019- 1.5 Locking pins have been added.
- 29 January 2019 – 1.6 Legacy folder added.
- 31 May 2019 – 1.7 Windows and Stair rails have been made thicker.
- 26 February 2020 (version 1.8) Solid version added.
Notes:
- Reference sheet for Small Printer and 15mm version included in the zip file.
- Right click and “Save As” to download the reference sheet below.
French Farmhouse Reference
French Farmhouse Solid Reference
Timothy Wright (verified owner) –
Are there plans to open the windows on the sections with interiors?
Matthew Barker –
We don’t have any plans to remove the glass from the windows in that model however it can be but out very easily with a sharp model knife.
Patrick Murray (verified owner) –
Are there plans to release the bottom, top and roof in the 2 part format similar to the French Shop models?
Matthew Barker –
No, not for these models. You will need a 150 wide printer bed.
Warren Sistrom (verified owner) –
Any suggestions on how to best print the small roof? It seems to print in give orientation it will need a lot of support material. But if turned upside down or on side will loose print detail of wood grains on the roof or pillars. I was thinking of dropping into the bed and printing top only. And then turning upside down and printing the support pillars only.
Matthew Barker –
I printed upside down with supports, it will only need light supports
Jonathan Sam (verified owner) –
Can you add the integrated floor locking pins you are doing on your more recent models to this on in a future update?
Matt Barker –
Yes, as we go through our old models we are adding the pins
Brian Etty (verified owner) –
Are you planning on releasing an interior attic space? It would be small but I would love to lift the roof and have that there.
Sam Campbell –
We are not currently planning an interior attic space, but we will add it to our development idea queue to investigate.
Augustine O’Neill (verified owner) –
Do the lower floors print without supports?
Matt Barker –
Yes, the model will print without supports