Cart (0)

Product Categories+

French House – Shop


Any sales taxes will be calculated in the checkout.

Quaint, brick walled and red roofed shops were a common sight throughout French villages in the early 1900s, with many still standing to this day.

The French House-Shop is a multi level 3D printed building. The building is 150mm x 100mm and each level is 50mm high. The set can be printed in three levels, Ground Floor, Second Floor and Roof. Or you can print those levels in two separate parts. This pack is the non ruined version of the French House-Shop Ruins pack.


This product is part of the APOC WW2 Ruins. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.



  • 5.1  Guide holes have been added.
  • 28 January 2019- 1.1 Locking pins have been added.
  • 29 January 2019 – 1.2 Legacy folder added.
  • 6 June 2019 – 1.3 Windows and Stair rails have been made thicker.
  • 29 November 2019 (version 1.4) Level 1 Stair rail has been shortened to allow easier printing.
  • 26 February 2020 (version 1.5) Solid version added.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Reference for the small printer is included in the zip file.
  • Split sections of all levels of the building are available for use with smaller printers.

Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports


Dimensions and weights are available in the image gallery

9 questions for French House – Shop

  1. Matthew Barker

    Its OK to ask questions here 🙂

  2. Christoph Loewe (verified owner)

    just noticed that House-shop X2 and House-shop X3 are the same files …
    So another part of lvl1 is missing in the cutted version.


    • Matthew Barker

      Thanks for spotting that Christoph, I have updated the file pack and added the missing piece

  3. Nigel Guest

    Matt is this set at 15mm?

  4. Matthew Barker (verified owner)

    This is set to 28mm, scale to 60% and it will be 15mm (perfect for Flames of War)

  5. G Rose

    Hi, are there any openlock bases for these houses including the ruined version (shop, town,farmhouse) at 15mm to go with the openlock hex roads?

    • Matthew Barker (verified owner)

      Not yet, we could look at them in the next Kickstarter

  6. omegaclone220 (verified owner)

    What are the Legacy versions? Is this a new format. I’m new to Printable Scenery.

    • Sam Campbell

      Legacy are original or older versions where some customers still want older versions after we’ve upgraded them.

  7. Thomas_Riepe

    How big are the split sections, as my printer isn’t that big?

    • Sam Campbell

      The levels are 157mm x 105mm x 50mm, there is also a small print version included which is half the length.

  8. niklas-schoenhorst (verified owner)

    It says in the description „prints without supports“ but the beginning of the handrail on level 1 starts mid air. Maybe connect it to the ground?

    • Sam Campbell

      This will be updated soon.

  9. christian gustavsen (verified owner)

    Is it possible to get this with no interior?

    • Jo Boorer (verified owner)

      We currently don’t have a version available with no interior.
      I will note this down on our updates list.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey