$9.95
The Swinging Traps set contains pieces to make up to 4 different swinging traps: the spiked mace, the swinging log, swinging blade and the swirling blade column. The swinging frame supports are designed to be placed on top of all square brick walls, like the Rampage Heavy Walls or Crypt Walls sets, with a 2″ corridor width. These can be scaled to support wider or narrower corridors by varying the length of the axle piece.
These are fine detail pieces and are designed to print on an FDM printer at 0.1 resolution at least. The full mace requires supports to print. There are alternate print options for the mace and swinging blade pieces.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Any good sort of rogue worth his leathers knows to look up as well as down when scouting dungeons. Any bad sort of rogue usually ends up sliced, mashed, maimed or crunched into a bloody pulp.
Updates:
Notes for Swinging Traps:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| Infill | 100% for resin printing, 20% |
| Layer Height | 0.05 high quality on resin printers, .1 high quality |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more
You must be logged in to post a question.
bfroehlich123 (verified owner) –
The chain looks too long to be used with low walls as the traps will rest on the ground if used as is. Any plans to adapt these for low walls?
Sam Campbell (verified owner) –
A good and quick addition. We will see what we can do.