Cart (0)

Product Categories+

Falling Axe Trap


Any sales taxes will be calculated in the checkout.

The Falling Axe Trap is a set of walls based on the A, C, D, P, Q and Z tiles, as well as a falling axe. These walls are compatible with all other OpenLOCK products.

The tiles print with an operational hinge. Vidoes have been included in the notes below to show you how to release the axe from the supports, as well as how to use filament with the axe trap.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.


This product is part of the Rampage Complete Dungeon. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Under your feet, you feel something move slightly. Before you can look down, a rush of movement beside you makes you leap backward suddenly. Your eyes widen in horror as you see a sharp axe before you, dug into the stones of the floor. Only the briefest hesitation, and that could have been your body instead.




  • 30 May 2018 (version 4.0) Updated to the latest version of Triplex.
  • 17 July 2018 (version 4.1) Filament Connection option included that prints the axe separately.
  • 7 July 2020 (version 4.2) Minor overhangs fixed.


  • Length of filament required for the hinge is in the name of each tile name that uses this option.
  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.

Additional information

File Type

STL files in ZIP folder


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required


Prints without Supports


There are no questions yet.

Be the first to ask a question about “Falling Axe Trap”
©2024 Printable Scenery. Website by Vienna & Bailey