Description
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
$7.95
The Schist Torch Wall is a multi-part wall that contains a sleeve for an LED light system to be inserted and separate flame pieces. This pack is part of the Clorehaven City building line of building tiles and is designed to be used with the Schist Walls. This set is compatible with all other OpenLOCK products.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
There is a version of the sleeve with printer supports.
You can use this guide for printing and fitting the Torch Walls with a miniature LED lighting system.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Notes:
Infill | 10% |
---|---|
Layer Height | .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
Supports | Prints without Supports |
Printing Notes | Depending on print quality the insert may need to be sanded to make a clean fit. |
You must be logged in to post a question.
novalightning15 –
I team. Love this pack and was wondering if there was any chance that you may look at adding a version of the long wall but with only one torch. I feel that 3 torches for a 20ft section is a little over kill.
Sam Campbell (verified owner) –
You can use the A wall with 2 IA walls for the same section.
seanwmcinnes (verified owner) –
Hey Printable Scenery. Just wondering for some advice as to how to rig up the LED unit? What fits in the gap and how? Did you have a specific battery pack in mind?
Jo Boorer –
Here is the link to help you.
https://www.printablescenery.com/2020/04/24/lighting-the-torch-walls/