My Account 
Description
At the height of the cities power the bridges spanned the width of the city, allowing fast travel between its various districts. Now these Bridges lie in ruins, braced with scaffolding and sheltering all number of insidious creatures below their dark spans.
Updated:
- 18 January 2021 (version 1.2) Wood planks for Stair top added.
- 8 June 2021 (version 1.3) Small printer cuts added.
- 25 January 2023 (version 1.4) Bridge-Span-Stairs have been updated for easier resin printing.
- 12 April 2023 (version 1.5) Slicing error corrected on Bridge-Span-T-Pt2-v.1.1.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
- First Published version 1.1
lybban (verified owner) –
The planks on top of the stairs seem way to large. The connector knobs are not even close to the same places. Or am I missing something?
Nicholas Jebson (verified owner) –
I have just checked and they were 10% out of scale. They will be updated this morning.
shionage (verified owner) –
HI guys,
just printed the extention B and it i bigger than the base , the corner and the slop …
Is it the B or the others that are the wrong size ?
thanks
Nicholas Jebson (verified owner) –
We had to update the pack as some of the pieces were out. If you re-download the ruined bridge spans that should have the B extension at the right scale.
sam-newman (verified owner) –
Hi, the Bridge span base is pretty large, and won’t fit on my Ender 5. It’s not the biggest, nor the smallest printer out there, so wondering if I’m doing something wrong? I’m assuming I shouldn’t be printing it end-on. Is there any chance of a split version?
Nicholas Jebson (verified owner) –
Hey Sam. I have had a look at it in Cura with an Ender 5 profile. The Ender 5 says that it has a 220mm x 220mm build volume but seems to slice off the end of the straight span, which is only 205mm. I’m not sure why it’s doing this as I am awaiting an Ender 5 of my own to test out. An option in the mean time would be to scale to 96%, as that is acceptable in the slicer, but I will organize for some small printer cuts to be done.
Fabrizio Guzman (verified owner) –
Hi, Any estimate when small printer will be released? thanks
Nicholas Jebson (verified owner) –
within a fortnight or so Fabrizio
Fabrizio Guzman (verified owner) –
any updates on the small printer?
Nicholas Jebson (verified owner) –
They should be available sometime in the next 2 weeks or so.
Mike –
Hi Fabrizio,
We’ve put this suggestion on our list of model updates so when it is ready you will receive an email.
Thanks!
lrsvilr (verified owner) –
Really loving this set. I couldn’t find the planks/top for the T section though. Is there something wrong on my end or is that missing from the new update perhaps?
Jo Boorer (verified owner) –
Bridge-Span-Top-B-v.1.0 is the part that goes on the T section.