$5.95
The Rope Bridge is a set of 12 wooden bridge spans that can be made into a flexible rope bridge. Each piece has a set of holes you can thread wire or waxed twine to join them together.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
The only escape across the chasm, there suspended in air, hung a rope bridge in disrepair.
Updates:
Notes:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .1 high quality |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
The Shadowfey Ruins cover the haunted landscape, providing some shelter in the realm of darkness and despair. In this article, we demonstrate how the ruins were designed to stack, creating a modular set of buildings and a wide range of layouts. Out in the Shadowfey, everything is ruined, from cracked stone to rotting timber to… Read more
In this video we demonstrate some effective techniques and tips you can use when assembling modular ruins using Murder Row. The same technique will apply for many of the other Shadowfey Ruins. Remember to take care when using superglue and other hazardous materials.
The dilapidated and haunted Shadowfey Ruins provide an excellent setting for horror themed encounters and games in ruined cities. This guide will help you achieve that look with a minimum of fuss so you can get gaming! This guide uses the Squatter Townhouse as an example but it is the same method we used for… Read more
You must be logged in to post a question.
Roy (verified owner) –
On prusaslicer, it gives the Empty Layers detected on Bridge section I, K and L. Everything else slices fine.
Sam Campbell (verified owner) –
You should be able to ignore this, it has test printed fine from Prusa slicer to Prusa i3 mk3.
lior.shapira (verified owner) –
How do you anchor the rope bridge on both ends? I couldn’t think of a good non-glue way to do this
Sam Campbell (verified owner) –
We’ve used 1.5 or 2mm gauge wire at the ends to create a hook. It also lets you style the bridge to the shape you want.
Gernot Stargardt (verified owner) –
Image 5 says Roads of Ruins, should be Rope Bridge
Jo Boorer (verified owner) –
Thanks for pointing this out.
This has now been fixed.
gabriel.sa (verified owner) –
Hello,
I like this rope bridge, but it seems to have been cut at the base. Underneath, I’m losing details, and the rope cuts cleanly.
Joanne Boorer (verified owner) –
Hi Gabriel, thanks for reaching out. This bridge was made to print on FDM printers but it is a good idea to have a version for resin printers to have details on both sides so will add it to our update board.