$7.95
The Walkways are designed to be used with the castle walls and battlements, but are compatible with all other OpenLOCK products.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
From above the battlements, you hear a yell. Archers stand at the ready, arrows nocked. It looks like you caught the attention of the lookouts.
Notes for Walkways:
| Recommended Printer | FDM or resin printer |
|---|---|
| Terrain Tinker | Available |
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 32mm Heroic & OpenLOCK |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 31.3% |
| 15mm Wargames | 15 | 1:116 | 46.9% |
| HO Scale | 20 | 1:87 | 62.5% |
| OO Scale | 22 | 1:76 | 68.8% |
| 28mm Wargames | 28 | 1:62 | 87.5% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 100.0% |
| - |
In this article, we’ll cover three different OpenLOCK doors and how to build them. The three types are the sliding door, the hinged door, and the hinged door with the stone cap. Each has its own advantages, but all go together easily. Sliding Door These kinds of OpenLOCK doors are the easiest; all you need… Read more
This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more
In this article, we’ll show you how we go about removing the small supports that are printed on all OpenLOCK model ports. These small supports are printed to support the overhangs in the OpenLOCK port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. For this, we recommend using… Read more
You must be logged in to post a question.
Jason Paull (verified owner) –
Any chance we can get these in Terrain Tinker with the option to swap the clip placement for a magnetic placement? Or a copy of the bundle here on PS that has magnet placement instead of clips?