Cart (0)

Product Categories+

Rampage Heavy Low Risers


Any sales taxes will be calculated in the checkout.

The Heavy Low Risers are designed to serve as steps for the Rampage Low Walls pack. They are are all 1″ high and can be used with all our other OpenLOCK products.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.


This product is part of the Rampage Complete Dungeon. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.


The corridor seems to be slowly heading uphill, with solid stone steps every few feet, taking you ever closer to the surface. Could the way out of this labyrinth be ahead? 




  • 16 April 2018 (version 3.0) Updated to Triplex
  • 22 June 2020 (version 3.1) Minor overhangs fixed.
  • 1 September 2021 (version 3.2) Geometry fixes made to tiles E, F, O, R and Y.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.

Additional information

File Type

STL files in ZIP folder


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Print Volume

100mm x 100mm x 100mm print build volume required


Prints without Supports


There are no questions yet.

Be the first to ask a question about “Rampage Heavy Low Risers”
©2024 Printable Scenery. Website by Vienna & Bailey