Cart (0)

Product Categories+

Plague Tree


Any sales taxes will be calculated in the checkout.

The Plague Tree is a large, single-piece model festooned with leering faces, vines and fungus. Its grasping arms come on a sculpted base the model can be printed in FDM and Resin. The FDM version is provided with custom supports, whilst the resin version has a pre-supported file.

This product is part of the Gloaming Wilderness. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Choked Whispers and gurgling moans emanate from the maws of countless faces trapped in the twisted bark of the Plague Tree. What demented force gave life to this abomination is unknown, yet the legends surrounding this horror have carried far.


  • 21 November 2023 (version 1.2) Cut option added as per customer request.
  • 9 April 2024 (version 1.3) 5E Monster Stats added to the download.

Notes for the Plague Tree STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Small Printer Reference is included in the zip file.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Plague Tree STL

Hollowheart Tree 5E monster Stats

Additional information


100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


pre-support version included in download., Requires supports for fdm printing, requires supports for resin printing, Supports touching buildplate

1 question for Plague Tree

  1. Kyle Zinteck (verified owner)

    Is it possible to update the model to a version where the 5 base pieces are unified and the remaining trunk and branch pieces are unified. This would create two STLs with a nice keyed joint from trunk to base. There’d be less overlapping FDM supports on the base and allow for two shorter individual prints. Fantastic model and details!

    • Jo Boorer (verified owner)

      Thanks for your suggestion. I will put this on our model update list.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey