Cart (0)

Product Categories+

Swamp Hillocks

$9.95

Any sales taxes will be calculated in the checkout.

The Swamp Hillocks provides troops with raised vantage points to scout out the swamps. Each of the four platforms has step access to ground level and the pieces pictured have been customized with extra branches from the Wildwood Trees.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

The roots of the Gloaming run as deeply as their trees grow tall, holding together the eroding lands of the swamps about them in the ever-changing landscape of chaos and mystery.  

Updates:

  • 15 December 2023 (Version 2.2) Swamp-Hillock-A now sits flat on buildplate.

Notes for the Swamp Hillocks STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Small Printer Reference is included in the zip file.
  • Pre-supported version for FDM printing included in the download.
  • Product measurements can be found in the image gallery.
  • First Published version 2.1

Swamp Hillocks STL

Additional information

Infill

10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Supports

pre-support version included in download., Requires supports for fdm printing

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

2 questions for Swamp Hillocks

  1. neotenyx (verified owner)

    I’m not sure these can currently “print without supports” as described. There are upper level roots overhanging nothing that would print as free-floating islands on FDM printers.
    I’ve had some failures with the steps on Hillock B already and have to find a way to modify to print sectionally instead.

    • Jo Boorer (verified owner)

      You are right. These do not print without support.
      We have included an FDM support version in this zip file.

  2. ljhugz (verified owner)

    Can you confirm the FDM supported version of these is actually intended as the name suggests? Support type was not what I expected when opening the files.

    • Jo Boorer (verified owner)

      If you are used to a different type of support in your slicer then use that on the unsupported version.
      Modelers, we use have different styles of supporting the overhangs. We include these for customers who are not experienced in creating their own support.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2024 Printable Scenery. Website by Vienna & Bailey