Cart (0)

Product Categories+

Death Marsh Mounds


Any sales taxes will be calculated in the checkout.

The Death Marsh Mounds are a set of scatter terrain depicting piles of skeletons being consumed by growing roots and vines. There are several smaller designs that have the options for small branches to protrude from the top. There are also larger combined pieces. All have been printed in resin and come with pre-supported files for ease of printing.

This product is part of the Gloaming Swamps. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Many adventuring parties seek their fortunes in the mysterious realm of the Gloaming, but few return. Scattered throughout this dangerous land are the remnants of those who chanced the perilous realm of Fey.  

Notes for the Death Marsh Mounds STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Resin support version included.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Death Marsh Mound STL

Death Marsh Mound STL

Additional information


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength


pre-support version included in download., Prints without Supports

Layer Height

0.1 high quality on FDM printers

3 questions for Death Marsh Mounds

  1. Kyote (verified owner)

    The branches are entirely too thin for FDM printing causing missing layers. Currently using Prusa slicer with a Prusa mk3s with 0.4n and 0.2mm layer height. Can they be thickened up please?

    • Jo Boorer (verified owner)

      We also printed these on Prusa Mk3s but with 0.1 layer height

  2. theartificersforge (verified owner)

    I am seeing the same issue as Kyote for FDM printing. Slicing in PrusaSlicer at 0.1mm layer height shows missing layers on the upper branches of all of the models which have them. Can this be looked at please?

  3. Matt Barker

    They are very thin, but they should be OK at 0.1 layer height. Ill check them and we can make a slightly thicker neck bone

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey