Name: Normandy Bunkers
Brand: Fallout: Wasteland Warfare
Availability: InStock

Normandy Bunkers

$4.95

Any sales taxes will be calculated in the checkout.

The Normandy Bunker is based on classic World War Two fortifications. This is a four-part model. However, we have included the complete model if you wish to print it out in one piece. If printed out in it’s separate parts, the model will need to be glued together.

This product is part of the APOC WW2 Ruins

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Bunkers such as these helped make the Normandy coastline into an impressive defensive fortress.

Notes for Normandy Bunkers:

The bunker shown in the picture had a spot covered with PVA and then sand to add to the concrete effect. Also, I printed the top pieces with supports switched on and left the support material in, as it looked like reinforcing mesh.
Right-click on the image below and “Save As” to download the reference sheet for this pack.

Additional information

Recommended Printer	FDM or resin printer
Dimensions	Dimensions and weights are available in the image gallery
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, FDM Prints without support
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

justin (verified owner) – December 1, 2016

I bought this model and i have to say its great. I love the crumbling concrete effect on it. I printed one for 40k but was wondering what you would recommend if i wanted to use it for Flames of War or its sister game Tanks? how much do you think i should shrink it down to?
- Matthew Barker (verified owner) – December 4, 2016
  
  For Flames of War I recommend scaling to 60%
Michael Fitzpatrick (verified owner) – February 21, 2025

I can’t seem to get this to print on a filament printer. I’m doing the separate parts, but it fails where there is texture, particularly on where the roof parts don’t make contact with the build plate. Advice?
- Joanne Boorer (verified owner) – February 21, 2025
  
  Hi Michael, Thanks for reaching out. Can you please send a pic to [email protected] along with details of your print settings and printer/slicer you are using.