Name: High Gate
Brand: A Song of Ice & Fire
Availability: InStock
Rating: 5.00 (2 reviews)

Description

The traders, hunters, and merchants entered the Kingdom through the High Gate, hauling their goods on carts and carriages. From the gatehouse above the portcullis, the guards eyed them dully. It was the same rabble day in, day out. The hooded figures approaching under the cover of a meat caravan counted on the guards feeling just that way.

Find out about how to use SystemHEX in our article here.

Our paint guide for castle bricks is here, and painting Wattle & Daub and Roof tiles is here. Check out this article here for tips on printing Throne & Ash models.

See below how the High Gate tessellates with the Castle Walls.

Top down graphic diagram of the High Gate in SystemHEX

Notes for High Gate 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First Published version 1.0

Additional information

Recommended Printer	FDM or resin printer
Infill	10% for FDM printing, 100% for resin printing
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a 3D Printed Island Castle Diorama

Posted on February 17, 2026February 25, 2026 by Sloane Dougherty

In this article, we’re going to cover building an Island Diorama for a 3D printed castle using our Throne & Ash models. We’ll show how to build the castle board, paint it, and finish it ready for setting up your castle encounter or wargame. We built our castle on a 6×4-foot table, but you can… Read more

5 Comments

SystemHEX Video Guides

Posted on November 28, 2025November 28, 2025 by Sloane Dougherty

As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more

Throne & Ash components reference

Posted on August 8, 2025November 25, 2025 by Sloane Dougherty

Throne & Ash models have many modular components, so we thought we’d compile a reference for you to check which products come with which components. We’ll list each product and the interchangeable plugs, corbels, and buttresses, so when you want to customise your next castle, you can easily check where to find the exact component… Read more

16 Comments

Building 3D printed scatter terrain for wargames

Posted on July 6, 2025October 23, 2025 by Sloane Dougherty

With Throne & Ash, not only can you use the SystemHEX design to build sprawling castles, you can also build amazing 3D printed scatter terrain perfect for wargames. In this article, we’ll show you how to turn basic walls, buildings, and ruins into immersive and engaging boards for skirmish wargames, like Mordheim, Malifaux, and Star… Read more

How to assemble Throne & Ash 3D printed doors

Posted on June 13, 2025February 25, 2026 by Sloane Dougherty

In this article, we’ll show you how to assemble your 3D printed Throne & Ash doors in a few straightforward steps. We’ll show you how to clean up the parts, fit them together, and check that it’s working. You’ll have functional doors throughout your castle in no time, perfect for when players need to sneak… Read more

5 Comments

Tips for 3D printing Throne & Ash models

Posted on June 6, 2025July 23, 2025 by Sloane Dougherty

In this article, we’ll cover a few basics and tips for 3D printing Throne & Ash models. We’ll cover the printer and settings we’re using, give some tips on smaller models, and give some tips for laying out models on your printer bed. Basic 3D printer settings tips We’re using Bambu Labs P1P 3D printers,… Read more

11 Comments

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025April 3, 2026 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

17 Comments

How to paint Wattle & Daub and Roof Tiles

Posted on May 26, 2025July 23, 2025 by Sloane Dougherty

In this tutorial, we’ll cover how we painted the wattle & daub areas and roof tiles from our Throne & Ash campaign. It’s very simple to recreate and uses simple techniques. Wattle & Daub is found on many of the Throne & Ash buildings, and there will be more to come as the stretch goal… Read more

14 Comments

How to assemble the King’s Keep

Posted on May 5, 2025February 25, 2026 by Sloane Dougherty

In this article, we’ll show you how we assembled the King’s Keep, the large 3D-printed centerpiece in our Throne & Ash campaign. We’ll go through all the components needed to put it together and provide a step-by-step process for what and how we used those components. We’ll also cover making the functional windlass included in the King’s Keep… Read more

35 Comments

How to paint castle bricks

Posted on April 29, 2025February 25, 2026 by Sloane Dougherty

In this article, we’re going to show you how to paint castle bricks, like the ones seen in the Throne & Ash models. The techniques shown are simple, easy, and will achieve great tabletop results. Let’s get started. For this guide, you’ll need the following: For this tutorial we’ll just use a simple 180 HEX… Read more

15 Comments

How to build a square castle

Posted on April 28, 2025July 17, 2025 by Sloane Dougherty

In this article, we’ll show you how to build a simple square castle using the Throne & Ash models. The campaign was designed around SystemHEX, which is intended for hexagonal options, but within SystemHEX, you can still build good old-fashioned square castles. To build the square castle you see in this article, you’ll need the… Read more

18 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025February 25, 2026 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

18 Comments

2 questions for High Gate

joshua.rouleau (verified owner) – December 11, 2025

Noting the currently released tesselation doesn’t match the diagram (120° vs 180°), are there plans for a future update with a 180° (and ideally 240°) option?
- Joanne Boorer (verified owner) – December 12, 2025
  
  Thanks for pointing this out. It has been corrected. I will pass on your request.
Christophe Pouzot (verified owner) – December 17, 2025

Hi, would it be possible to have a version of the high gate on a flat wall too? like the west gate, so they can be switched?
- Joanne Boorer (verified owner) – December 18, 2025
  
  Great idea. I have passed your comment on to the team.
Rated 5 out of 5

Bill Robertson (verified owner) – March 1, 2026

The above comments and promises are helpful, but i’ve printed this and other T&Ash models that (my accident) don’t have a 180 degree (straight) alignment. Now that i’ve printed them, i’m looking for small curved adaptors that would fit this to my straight wall. I found Horseshoe Wall Adaptors/HorseshoeWall-F-30 and M-30, for example, but these are actually 60 degree curves, not the required 30 (is that an error? Six of them together make a full 360 circle). are there any 30 degree adaptors in this fabulous array of models?
- Joanne Boorer (verified owner) – March 2, 2026
  
  Hi Bill. Can you please send a picture of your layout to [email protected] so we can help get you the correct part you need.
Rated 5 out of 5

Bill Robertson (verified owner) – March 1, 2026

Also, this drawbridge currently dangles in thin air. Is it meant to attach to the Grand Bridge extension, or, what?
- Joanne Boorer (verified owner) – March 2, 2026
  
  The High Gate is made to go with the High Gate bridge. Which has a piece called High-Gate-Bridge-Landing for the top of the drawbridge to lay on.
Bill Robertson (verified owner) – March 2, 2026

photo sent, but actually, it will probably be easier just to await publication (soon?) of the 180 degree base.