Name: Blighted High Bridge Connector
Brand: kb-darknessanddesolation
Availability: InStock

Blighted High Bridge Connector

$12.95

Any sales taxes will be calculated in the checkout.

Great towers rose at the crossroads, joining the many paths that traversed the heavens.
Compatible with all Darkness and Desolation models, as well as other SystemHEX models.
The height of the steps corresponds to the heights of SystemHEX tower levels.
For tessellation purposes, the tower can be replaced by the tallest Bridge-to-Stairway connector
Can be standalone using the Blighted Stairway slider.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Many bridges had fallen to ruin. Whole sections had sheared away and tumbled into the clouds, leaving jagged stumps of masonry jutting into empty air. Where they could, the adventurers picked their way around the cracks and crevasses, fingers wedged into the stone, boots scraping for purchase on ledges.

SystemHEX guide for the High Bridge Connector

Notes for Blighted High Bridge Connector 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Small Printer reference available in the zip file.

Supports touching the build plate are required on some small printer cuts.

Product measurements can be found in the image gallery.

First Published version 1.2

Additional information

Recommended Printer

FDM or resin printer

Infill

100% for resin printing, 15%

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Scale

32mm Heroic & OpenLOCK

Supports

requires supports for resin printing, FDM Prints without support, Needs supports on small printer files

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

SystemHEX: What’s the scale?

Posted on October 14, 2026November 10, 2026 by Matt Barker

Throne and Ash is designed at 32mm, but because you print it yourself, you can choose to print it at 28mm. Neither scale is “wrong”. The right one depends on how your games actually use the castle. The short answer: Print at 32mm (original size) for skirmish games when your figures will be moving around… Read more

Leave a Comment

Creating Mixed Hex & Square Layouts with SystemHEX

Posted on September 24, 2026September 24, 2026 by Nick Hutchinson

In this article, we’ll show you how to build square castles and ways to integrate square layouts into SystemHEX. We’ll cover how the square G Adaptors on the Gatehouse work, as well as techniques for using the new Square-to-Hex Wall effectively. The methods in this guide can be used with all of your SystemHEX buildings. … Read more

Leave a Comment

Darkness & Desolation Update: more models released and stretch goals unlocked

Posted on July 31, 2026July 31, 2026 by Sloane Dougherty

To finish off a great first week, we’ve released the last three models from the base pledge: the Gothic Gate House, Ruins of Desolation, and the Trench Tomb. Now we can begin working on the first stretch goals and get those released too. As a bonus, we’ve released the Gothic Curved Walls as well. These… Read more

1 Comment

Darkness & Desolation Update: new stretch goals added and more models unlocked!

Posted on July 30, 2026July 30, 2026 by Sloane Dougherty

Hey everyone, we’ve just added some more stretch goals to the lineup: The Gothic Small Round Tower, the Cloister of the Condemned, Trench Mausoleum, Gallows Gate, Blighted Stairway, and the Shrine of Damnation. This takes us to 18 stretch goals revealed, but we’ve got plenty more to come! We’re getting more and more great ideas… Read more

Leave a Comment

How to Paint the 3D Printed Gothic Walls from Darkness & Desolation

Posted on July 28, 2026July 28, 2026 by Sloane Dougherty

In this article, we’ll show you how to paint the 3D printed Gothic Walls from our Darkness & Desolation campaign. We’ll cover the paints needed, the techniques we used, and any tips along the way to get your Gothic Walls ready for the tabletop. The methods in this guide can be used on all of… Read more

Leave a Comment

Darkness & Desolation Now Live!

Posted on July 28, 2026July 28, 2026 by Sloane Dougherty

Hi everyone, we’ve just launched our latest campaign Darkness & Desolation! This campaign features grimdark and gothic-inspired 3D-printable castles, ruins, and trenches powered by SystemHEX. It features fully modular, interlocking buildings that connect to walls and other structures. We’re making this campaign compatible with Throne & Ash so you can create new castles or expand… Read more

2 Comments

SystemHEX Video Guides

Posted on November 28, 2025November 28, 2025 by Sloane Dougherty

As the catalogue of Throne & Ash models expands, so do the possibilities of things you can build with SystemHEX. As we release new models and complete the range, we’ll produce videos that explain the models and what you can do with them. Below is a playlist of videos we’ve produced for SystemHEX using the… Read more

Leave a Comment

How to build Castle Agnes using HEX template pieces

Posted on May 30, 2025April 3, 2026 by Sloane Dougherty

With the release of the Queen’s Quarters, we thought we’d show how to build a castle called Castle Agnes using the model and some of the other new models from this week. This one’s a bit more of a complex build and uses a wide variety of models from Throne & Ash. To show you… Read more

17 Comments

Introducing SystemHEX: Our new modular building system

Posted on April 16, 2025February 25, 2026 by Sloane Dougherty

SystemHEX is our new modular building system that allows you to easily create and customize large-scale builds. Our new campaign, Throne & Ash, showcases its potential with the size and variety of the castle layouts you can build. In this article, we’ll cover the fundamentals of the SystemHEX design, how to implement it in your… Read more

20 Comments