Altar of Desolation

$16.95

Any sales taxes will be calculated in the checkout.

The Altar of Desolation is a stage for unspeakable ritualistic practices.
A modular set of ruins that uses SystemHEX to combine together.
Compatible with all other Desolation models, as well as other SystemHEX models.
Comes with the Altar itself, attachable ruin sliders, and small rubble piles for scattering around the battlefield.

This product is part of the Darkness and Desolation (All 3 Bundles) and Desolation Bundle.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

This ancient altar marks the passing of a long-forgotten faith and the coming of more profane religions. No wind blows through the ruined pillars, and the very air vibrates with power in suspense of the rituals to take place on this most desolate altar.

Top down render of the Desolation models in the SystemHEX template

Notes for Altar of Desolation 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer reference available in the zip file
Product measurements can be found in the image gallery.
First Published version 1.2

Altar of Desolation Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 15%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How to Paint the 3D Printed Gothic Walls from Darkness & Desolation

Posted on July 28, 2026July 28, 2026 by Sloane Dougherty

In this article, we’ll show you how to paint the 3D printed Gothic Walls from our Darkness & Desolation campaign. We’ll cover the paints needed, the techniques we used, and any tips along the way to get your Gothic Walls ready for the tabletop. The methods in this guide can be used on all of… Read more