Description
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
$7.95
The Heavy Stone Torch wall is a multi-part wall that contains a sleeve for an LED light system to be inserted and separate flame pieces. This set is designed to be used with the Rampage Heavy Walls and is compatible with all other OpenLOCK products.
Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.
There is a version of the sleeve with printer supports.
You can use this guide for printing and fitting the Torch Walls with a miniature LED lighting system.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Notes:
Infill | 10% |
---|---|
Layer Height | .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
Supports | Prints without Supports |
Printing Notes | Depending on print quality the insert may need to be sanded to make a clean fit. |
You must be logged in to post a question.
Andy Comber (verified owner) –
I have a few questions on the torch walls. I’ve been eagerly waiting for these and they look great by the way but my questions are as follows:-
1) what size LEDs are required to fit the torch sections?
2) will there be a diagram showing how the LEDs fit in presumably to hold a battery
3) is there any kind of switch system to turn off or is it a case of taking out the battery when not in use?
Thanks in advance
Andy
Sam Campbell (verified owner) –
I’ve updated each of the Torch Walls with a guide
Paul Feeney (verified owner) –
Thanks for these, I am so excited to add these to my printed collection.
Nicholas Jebson –
No Worries Paul, always happy to deliver awesome products like these to you guys!
Tony Crawford (verified owner) –
Hi guys, I’ve got a question about this product and the one for the crypts as well. In your kickstarter for Clorehaven and the Goblin Grotto, it said you were able to get an add on for a “Dungeon Booster”. In this dungeon booster were three walls, two of them called Crypt Torch Walls, and one of them called Heavy Stone Torch Wall. One of the crypt torch wall had a brasier on the wall, while the other crypt torch wall and the Heavy Stone Torch Wall had an alcove with a skull and a brasier.
I have noticed that these files are not in the now downloadable files for the Heavy Stone Torch Wall or the Crypt Torch Wall. But I still see them available for the Architects of Destruction’s version of the Rampage Dungeon system. You can see a large picture of it right on their kickstarter page.
I’m wondering why Architects of Destruction has them but Printable Scenery does not.
I would really love to have those files to be able to print out!
Mike (Printable Scenery) –
Hi Tony,
Those torch walls in the end were only developed for plastic injection molding for AoD and not as STLs. I’ll add your request to our list of potential model updates when we look at the Dungeon Booster sets again in the future, they might even end up on Terrain Tinker at some point.
Tony Crawford (verified owner) –
Ok, Thanks Mike. I appreciate the info.