Name: Governor's Mansion
Brand: Age of Sigmar
Availability: InStock

Description

Every local despot needs a stately mansion to flaunt his wealth and influence.

Updates:

30 June 2018 (version 1.2) The Scale of the mansion increased by 20% to fit in line with the other Winterdale buildings. The smaller-scale building can still be found in the legacy folder.
5 July 2018 (version 1.3) Filament hole size corrected and further cuts made for smaller printers.
31 October 2019 (version 1.4) Solid version added.
21 May 2021 (version 1.6) Fireplace version added.

Notes for Governor’s Mansion:

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Reference sheet for medium printers

Reference sheet for small printers

Solid Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Prints without Supports
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Dave Tuite (verified owner) – July 1, 2018

Would it be possible to get email updates when a model updates? I just wasted a bunch of plastic printing the 1.1 version of the file only to realize after printing its way too small for 28mm and to see an update…….
- Sam Campbell – July 2, 2018
  
  You can get notifications for product updates by making sure you have the “Product Updates” checkbox ticked. You can follow the link here and it will update you when any changes are made to products you have purchased.
  
  https://www.printablescenery.com/my-account/subscriptions/
Steven Lamoreaux (verified owner) – August 1, 2018

If this is not 28mm what scale would you say this is?
- Matt Barker – August 2, 2018
  
  Yes this is 28mm scale
jamieloft (verified owner) – January 17, 2019

I am printing my first copy of if. the scale is true 28mm so I would suggest it might need a little bump for GW scale minis
- Matt Barker – January 17, 2019
  
  Yes, if you are using GW minis, then the scenery could be a little bit bigger that true 28mm as GW minis are a bit bigger than true 28mm.
  
  You can check the scale before printing on our How to check scale and rescale blog
jniles (verified owner) – July 13, 2021

So what is the dimensions of the Mansion? In Prusa it is showing 117.35mm by 165.62mm.
- Nicholas Jebson – July 14, 2021
  
  Hey Jniles, the ground floor section of the governor’s mansion is the smallest part, with the full dimensions being 150.5mm x 287mm x 188mm.