My Account 
Description
“Come on out, or I’ll blast ya out-o-there with the ships’ cannons!” -Long John Silver
Updates:
- 22 November 2018 (version 1.2) Correction made to Roof.
- 8 January 2018 – Removed the pre-cut version.
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack.
- Product measurements can be found in the image gallery.
Reference sheet for medium printers
Reference sheet for small printers
ryanphillips1991 (verified owner) –
Will the solid file print without supports?
Am around 8 hours into the 3 day print, and have just had a horrifying though that the floors will fail?
Matt Barker –
Yes, the floor will fail in the solid version if you do not use supports. You should print the two levels separately.
jose.zdimera (verified owner) –
Hi, I am getting “model is not manifold” error when slicing lvl2 in Cura. and infill showing in the preview. Is there a way to fix that?
Nicholas Jebson –
That is a problem with Cura. We have had this come up a couple of times with complex geometries, but when we put the part into Netfab to check it it is registering just the one manifold shell. It will be safe to print.