Gloomwood Treehouse

Name: Gloomwood Treehouse
Brand: Age of Sigmar
Availability: InStock

$14.95

Any sales taxes will be calculated in the checkout.

The Gloomwood Treehouse is a fantasy-styled building, designed for use in tabletop and role-playing games.

Featuring hinged doors, removable roofs and multiple storeys, it prints without supports as separate levels.

Included are versions with plain windows and small printer versions.

The doors should print with supports touching build plate at 0.1 resolution.

This product is part of the Complete Elves

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

An elegant staircase winds its way up the tree to a small cottage. The sloping green roof and delicate carved windows blend into the branches and leaves surrounding the house, rendering it almost invisible at a distance. From the balcony, a young elf waves and calls for you to climb the stairs.

Update:

15 March 2019 (version 1.1) Correction made to name labelling of the Lv2 door and roof.
9 July 2019 (version 1.2) Window Low detail option added.
7 August 2019 (version 1.3) Lv2 Window added to low detail option.
7 February 200 (version 1.4) Lv3 Window overhang fixes made to level 3 in the main file and without window detail folder.

Notes for Gloomwood Treehouse:

The reference sheet for the small printer option is included in the zip file.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
To make the hinges, use a small piece of unused filament. You can refer to this video for instructions.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Layer Height	0.05 high quality on resin printers, .2mm For Large parts and .1mm for small parts
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Requires supports on some files
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Painting Guide: Library of Ithillia

Posted on April 30, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint The Library of Ithillia The model was initially primed with Army Painter Leather Brown. Stone This is the scheme used for the bricks and stone. Heavy dry-brush: Army Painter Arid Earth. Final highlight: Army Painter Skeleton Bone. Trim This is the scheme used on… Read more

Painting Guide: Gloomwood Trees

Posted on March 14, 2019July 24, 2025 by Matt

Below is a painting guide, explaining the steps taken to paint the Gloomwood Trees The models were initially primed with army Painter Leather Brown primer. Stone This is the scheme used on all the stone underneath the roots. Full Layer: Army Painter Leather Brown. Dry Brush: Army Painter Arid Earth. Wood This is the scheme… Read more

Comments

t.filipek (verified owner) – March 18, 2019

Hello!
Great design! Is it possible to have some clues on which parts support is needed.
Thank You!
- Sam Campbell (verified owner) – March 19, 2019
  
  Only the doors need to be printed with supports.
t.filipek (verified owner) – March 19, 2019

Great!!!
cameron.rivenbark (verified owner) – January 19, 2020

Can you make an update to support the railing of the stairs, as well as the ornate design at the top of the large window arches?

They hang below 90 degrees, and require very substantial supports, and are difficult to remove. Beautiful model, a few tweeks could make it a beatiful model to print too! 🙂
-Cameron
- Sam Campbell (verified owner) – January 21, 2020
  
  Yes, we are looking at updating this soon.
cameron.rivenbark (verified owner) – February 8, 2020

The updates you made are perfect. Spot on. Thank you very much.
- Nicholas Jebson – February 10, 2020
  
  You are very welcome Cameron!
airsoftg36e – April 7, 2020

what is the measure?
- Sam Campbell (verified owner) – April 8, 2020
  
  It is 29cm tall when fully assembled
strikingharmonies – August 2, 2020

Any chance that the elven set of buildings could be modified so that the elven walkways can be attached to any of the other tree buildings? I’m looking to create an elven tree village and would love to make more use of the walkways between trees. Thanks!
- Sam Campbell (verified owner) – August 3, 2020
  
  Thanks for the great suggestion. It’s something we could possibly look at doing in the future. We’ll add it to our development ideas list.
LeoNiccolo (verified owner) – December 18, 2020

Is it possible to get a photo of how to support the doors? Can’t get it to print right.
- Nicholas Jebson – December 18, 2020
  
  supports touching buildplate is what we would recommend if you are doing supports, otherwise it should generally print without supports. I think the one we printed for the shoot just used a brim
Trevor Jones (verified owner) – February 9, 2021

I was wondering what is the stl file sized for in mm (25 or 30) if you just print it directly without any resizing?
- Nicholas Jebson – February 9, 2021
  
  around 28mm-30mm miniature size