Cart (0)

Product Categories+

Gloamwood Tower


Any sales taxes will be calculated in the checkout.

The Gloamwood Tower is a single platform tower made up of twisted branches and vines, festooned with fungi. The top platform prints separately to the base and has locking pins to align correctly when assembling.

This product is part of the Gloaming Swamps. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


The perfect safe haven for any wishing to temporarily escape the wrath of the Water Folk in the swamps below, these Gloamwood Towers are Gloaming made from simple means yet offer at least a defensible position in a tight spot.

Notes for the Gloamwood Tower STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Some parts require support for FDM printing.
  • Product measurements can be found in the image gallery.
  • First Published version 1.1

Gloamwood Tower STL

Additional information


10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength


FDM Supported files included for small printer cuts, Original File prints without supports

Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


There are no questions yet.

Be the first to ask a question about “Gloamwood Tower”
©2024 Printable Scenery. Website by Vienna & Bailey