Name: Giant Statue
Brand: Age of Sigmar
Availability: InStock
Rating: 5.00 (1 reviews)

Giant Statue

$7.95

Any sales taxes will be calculated in the checkout.

Rated 5.00 out of 5 based on 1 customer rating

The 3D printed Giant Statue is a piece of scatter terrain for tabletop wargames and role-playing games. Covered in details of vines, bushes, and broken rocks the Giant Statue blends in with the Shadowfey Wilds sets and makes a great centrepiece or objective for the battlefield.

This product is part of the Shadowfey Wilds

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Toppled, broken, and choked with weeds; the giant statue serves as a stark reminder that all things fade. Its benevolent gaze now stares blankly at the sky as it slowly crumbles with time.

Updates:

19 September 2022 (version 1.2) Correction made to the zip file.

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First published version 1.4
Small printer cuts provided in half or quarter cuts.

Ruined Giant statue STL

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

1 question for Giant Statue

tamarack928 (verified owner) – May 17, 2021

ooh what’s the paint scheme here. The white color? iS it just a white drybrush over a grey?
- Mike – May 17, 2021
  
  Hi tamarack!
  The state was started with a Field Grey (Army Painter) basecoat then drybrushed with Banshee Brown (AP), Skeleton Bone (AP), then Mummy Robes (AP) and finally White. It gives it a nice, aged look working from grey through the cream tones to white.
  To add a bit more aging it got a few spot washes of Agrax Earthshade and Military Shader.
  
  Hope that helps!
jj65 – July 22, 2021

This is a beautiful piece of terrain. Unfortunately, I don’t have a 3D printer. I have also been unable to find another vendor through the “get it printed” tab that carries this piece. Do you know of any websites where I could order a printed copy of this terrain piece? Thank you!
- Mike – July 22, 2021
  
  Hi!
  
  That’s odd, as the licensed printers listed on the product page should be able to print it for you.
  I’m sure if you reach out directly they’ll be able to help you out as that is the list of places you could buy a printed version from.
zmcrotts (verified owner) – July 28, 2021

Is it possible to obtain a version of this and other shadowfey STLs without all the foliage and shrubs? I prefer being able to customize those kinds of things and would rather use actual flocking for it than PLA.
- Mike – July 28, 2021
  
  Hi Zmcrotts,
  
  We will add to this our list for potential model updates in the future. As you’ve purchased the product, when it happens you’ll be notified 🙂
Andrake720 (verified owner) – September 19, 2022

Just FYI, it seems that the half cut files are corrupted on the zip file. I’ve tried downloading and slicing the half cuts multiple times and they keep failing. The quarter cuts seem to be working though.
- Jo Boorer (verified owner) – September 19, 2022
  
  While I could not replicate the error you were having, I did notice the old versions were in the Half cut folder along with the new ones, so I have updated the zip file.
  I checked the half version in Netfabb, Prusa slicer, and Cura slicer 4.8.0. We are having customers having issues with Cura 5.1. Is this what you are using?
  If you are still having an issue, can you please send a screenshot to [email protected]
Rated 5 out of 5

Andrake720 (verified owner) – September 22, 2022

Hi, thanks for the follow-up. Confirmed it an issue with Cura 5.1.0 and they have said they are investigating it.
- Jo Boorer (verified owner) – September 22, 2022
  
  Thanks for letting us know.