Cart (0)

Product Categories+

Dragon’s Graveyard

(5 customer reviews)


The Dragon’s Graveyard is a 13 piece scatter terrain set of a fallen ancient dragon’s bones for use in tabletop or role-playing games in a fantasy setting.  Use the set to fill out an entire wilderness table of terrain or as a centerpiece for skirmish scenarios or epic battles.

The dragon’s head comes in two pieces, the jaw and insert may need sanding to fit. The pieces can be easily scaled up or down to represent a young dragon to a titan dragon.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


A bard can tell epic stories of the how such a colossal beast lived and fought until it’s fall, a necromancer can make up more stories.


  • 3 March 2021 (version 1.3) Rock added to Skull to support bone overhang.
  • 16 March 2021 (version 1.4) Wing B has been fixed to correct a slicing issue.
  • 22 October 2021 (version 1.5) Small Printer cuts added.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.
  • First Published version 1.2

Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports

5 questions for Dragon’s Graveyard

  1. Robert Gorman

    I want to hang this on my wall between uses, what’s the overall dimensions when printed at 100%?

    • Nicholas Jebson

      Roughly 95cm from nose to tail, and 92cm from wing to wing

  2. thernand (verified owner)

    I thing there is an issue with Dragon-Graveyard-Wing-B-v1.0. When viewed in Cura the first layer and the send layer are not the same and is causing failures.

    • Nicholas Jebson

      Thanks for that. I can see the issue and am working on fixing it now. should be an update later today fixing that.

  3. thernand (verified owner)

    Hi, I just wanted to add that I did 4 walls on the ribs (Dragon-Graveyard-Ribs-v1.1) so they would be a little more solid. I had 2 failures where ribs would break. The other thing I did was increase the infill to give the ribs more support. Yes this did increase the print time but made it more durable.

  4. David Dickson (verified owner)

    Exquisite sculpting! Prints like a dream. (Printing this in Aug. 2021.)

  5. ken long

    Just finished printing this on a new Elegoo Jupiter 3. Long print time using the recommended settings but clean print with no fails. And the model? Absolutely brilliant. Printed for my son-in-law who has wanted it since it first came out. I have a feeling he will be blown away. Very highly recommended especially at full size print.

    • Jo Boorer (verified owner)

      Thanks for the feedback.

Add a question

This site uses Akismet to reduce spam. Learn how your comment data is processed.

©2023 Printable Scenery. Website by Vienna & Bailey