$3.95
The Dragon Dais can be printed as the ruined version or the complete version, and is designed to work alongside the Dragon Archway.
It will print without supports. The scale is set to 100mm diameter.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
High in the hills are the sites where victims were sacrificed to appease the dragons. Many lie in ruin, having fallen victim to vengeful relatives.
Notes for Dragon Dais:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Dimensions | Dimensions and weights are available in the image gallery |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
You must be logged in to post a question.
minh.pham.r62 (verified owner) –
having some issues printing this. I’ve had 3 attempts and each time it seems to get closer and closer but ultimately fails. The last attempt got to base of the bowls but then it somehow caught onto the right two pillars which broke off 🙁
Nicholas Jebson –
Hey Minh, whats happening when the print fails? If the hotend is hitting the top of the pillar and pushing it over then that could be a retraction issue.