City Watermill

Name: City Watermill
Brand: Age of Sigmar
Availability: InStock

$14.95

Any sales taxes will be calculated in the checkout.

The Water Mill is a large FDM 3D printer model featuring a crane and two different water wheels. Each wheel has supporting brickwork and can be interchanged without the need for gluing. The crane requires string to assemble it.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Ramshackle & Ruin: Cities Bundle

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Not even the flow of the sewer’s effluence is wasted at the port city, used to power the rustic watermill, its stinking progress helps grind the gears of progress, even if hygiene is overlooked while doing so.

Notes for City Watermill 3D print:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Small Printer reference sheet included in the zip file.
Some Small Printer cuts require support.
Important: This product is scaled to 32mm. To print it at 28mm to match other 28mm terrain, scale to 90%.
Product measurements can be found in the image gallery.
First Published version 1.2

City Watermill 3d Print

Swappable option T

Level 1 City Watermill (City-Watermill-Lv1)
Level 2 Merchant Guild (Merchant-Guild-Lv2 and Balconies)
Level 3 Merchant Guild (Merchant-Guild-Lv3 and Roof Spikes)
Level 4 City Watermill (City-Watermill-Roof)

Swappable option U

Level 1 Merchant Guild (Merchant-Guild-Lv1)
Level 2 City Watermill (City-Watermill-Lv2)
Level 3 City Watermill (City-Watermill-Lv3)
Level 4 Merchant Guild (Merchant-Guild-Roof)

To view other swappable building layouts click here.

Additional information

Recommended Printer	FDM or resin printer
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support, Support needed for small printer cuts

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a modular Ramshackle board for gaming

Posted on January 28, 2025July 23, 2025 by Sloane Dougherty

Warbands fight on cobblestone streets, ruins filled with danger and loot, and tall buildings for dramatic leaps of faith. These are all dream scenarios for fantasy wargamers and role-players. But having the right kind of board that enables this and gives you a different experience each time you play on it can take some work…. Read more

17 Comments

Comments

Bill Robertson (verified owner) – August 12, 2025

has anyone tried printing the crane without supports?
- Joanne Boorer (verified owner) – August 13, 2025
  
  Would pay to print with supports unless you have good buildplate adhesion.