Cart (0)

Product Categories+

City Inn

$29.95

Any sales taxes will be calculated in the checkout.

The City Inn is a large 3D printer model whose lower floor is swappable with the City Manor Lower floor. Its large roof and many balconies make it an ideal centerpiece for tabletop RPGs and Skirmish Wargames.

This model is part of the Cities of Ramshackle & Ruin Campaign

This product is part of the Ramshackle, Ruin and Port (All 3 bundles) or Cities of Ramshackle. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

This towering common house provides adequate lodging for the many sailors and merchants in need of a night’s rest on land between voyages to and from the city. Each room grants access to private balconies, offering sheltered views of the bustling portside below.

Notes for City Inn STL:

  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • A small printer reference sheet is included in the zip file.
  • Important: This product is scaled to 32mm. To print it at 28mm to match the other 28mm terrain, scale it to 90%.
  • Product measurements can be found in the image gallery.
  • First Published version 2.6

City Inn STL City Inn STL

Swappable Options Ramshackle Swappable STL

To create the building as shown in images above you will need the following levels: The red areas show the levels from other models.

Swappable option I

Swappable option J

  • Level 1 City Inn side 1 (City-Inn-Lv1) Side 2 City Manor side 1 (City-Manor-Lv1)
  • Level 2 City Inn (City-Inn-Lv2-Mirror) Side 2 City Inn (City-Inn-Lv2)
  • Level 3 City Inn (City-Inn-lv3-Mirror) Side 2 City Inn (City-Inn-Lv3)
  • Level 4 City Inn (City-Inn-Lv4-B) Side 2 (City-Inn-Lv4-A)
  • Level 5 City Inn (City-Inn-Roof and Roof Spikes)

 

Swappable 3d print file

Swappable option N

  • Level 1 City Inn (City-Inn-Lv1)
  • Level 2 City Blacksmith (City-Blacksmith-Roof-Pt1) + (City-Blacksmith-Roof-Pt2) + (City-Blacksmith-Top-1) + (City-Blacksmith-Top-1)

 

To view other swappable building layouts click here.

Additional information

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, Prints without Supports

Scale

32mm 1:61

Comments

There are no questions yet.

Be the first to ask a question about “City Inn”
©2024 Printable Scenery. Website by Vienna & Bailey