Name: Church Walls
Brand: Bolt Action
Availability: InStock

Description

The brick walls that served both a practical and ornamental purpose during peacetime, stood no chance against the ravages of war.

Updates:

28 July 2017 (version 1.1) Contains Mirror tile versions; Church Wall End-Mirror-v1.1, Church Wall Ruin C-Mirror-v1.1, Church Wall Ruin End-Mirror-v1.1, church Wall Ruin-Mirror-V-v1.1.
7 November 2018 (version 1.2) Clip hole ports updated.
21 November 2019 (version 1.3) T join wall options and extra corner option added.

Notes for Church Walls:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Church Wall Reference

Church Wall Mirrors Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

4 questions for Church Walls

mbatzloff (verified owner) – July 23, 2017

Great products as always. Regarding the walls is it possible to get the single end piece in the opposite configuration also – ie the open lock adapter hole on the other side? Thank-you.
- Matt Barker – July 24, 2017
  
  Yes, I’ll make a mirrored version and re upload the zip. Most slicers like Cura will allow you to ‘mirror’ the object.
mbatzloff (verified owner) – July 28, 2017

Thank you for the very prompt response, plus the extra bit of information – very useful for a beginner like myself.
- Matt Barker – July 29, 2017
  
  No problem 🙂
Doyle Collins – November 15, 2017

Do you happen to have a gate for these walls? doyle
- Matt Barker – November 15, 2017
  
  There is no gate for these walls. Definitely something for the to-do list though
egruiz (verified owner) – November 30, 2018

This is a really neat set.

My wish-list for additions:

T-Intersection
Inverted Corner (so that the pillar slant can remain consistent)
30mm wide Arch/Lintel with add on Iron bar gate and wood door
60mm wide Arch/lintel with add on Iron bar gate and wood door
- Sam Campbell – December 6, 2018
  
  I’ll add it to the suggestion queue to see if we can get it done.