Name: Bank
Brand: Dungeons and Dragons
Availability: InStock

Bank

$14.95

Any sales taxes will be calculated in the checkout.

The Bank comes as a three part model for larger printers and the cut version for small printers. Print at .2 with out supports.

This product is part of the Time Warp Americas

Description

Banks were often the targets of robbers and bandits, and so had to be well built and defensible.

Updates:

1.2: Bank floor has had a small mesh repair.
30 May 2017 – 1.3 Minor mesh repair on all components.
6 December 2017 – Windows have been made thicker on Bank-Floor1 and Bank-Floor2.
19 February 2019 – 1.5 Locking pins have been added.

Notes for Bank:

A reference sheet for the small printer option is included in the zip file.
Right Click and “Save As” to download the reference sheet below.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Prints without Supports
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

1 question for Bank

Daniel – May 8, 2017

In the default 28mm scale how large a print bed is needed to print in three floors, or is that not recommended?
- Matthew Barker – May 8, 2017
  
  The bank is 180 wide. I printed the floors complete on a Prusa i3 Mk2 no problem. I recommend you check the z-alignment and use a raft if you print the whole floor.