Cart (0)

Product Categories+

Alchemist Guild Expansion

(11 customer reviews)


Any sales taxes will be calculated in the checkout.

The Alchemist Guild Expansion set contains pieces for building walls, doorways, circular and square towers with bridging pieces, observatory roof and rectangular roof. This pack is part of the Clorehaven City product line of building tiles and is compatible with all other OpenLOCK products.

To build the Alchemist Guild as pictured you will require pieces from other sets that are listed below.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

A small piece of filament or wire can be used as a hinge pin to attach the door to the doorway.

This product is part of the Clorehaven. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer.


Guild membership is open to the astute or parent’s rich enough to buy their children’s entrance fee. Once there, students can seek to discover the secrets of the universe through the observatory roof or have a hand at attempting to transmute lead into gold in the laboratory tower.

To assemble the Alchemist Guild as pictured you will need the following Clorehaven sets: Rustic Stone FloorsRustic Stone and Wood StairsSchist WallsTudor Walls, Clorehaven Library Expansion,  Rustic Wooden and Rustic Stone floors. To assemble the Alchemist Guild and other buildings of Clorehaven you can download the Assembly Guides.


  • Right-click on the image below and “Save As” to download the reference sheet for this pack.
  • Product measurements can be found in the image gallery.


Additional information



Layer Height

.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)


Prints without Supports

Printing Notes

Adapative Layering recommended

11 questions for Alchemist Guild Expansion

  1. insanejigsaw (verified owner)

    Will there be a bridge converter for a straight wall section?

    • Sam Campbell (verified owner)

      Yes this is something we could look at doing.

  2. jonathanquek (verified owner)

    would it be possible for a middle bridge section for extending the length of the bridges? 🙂

    • Sam Campbell (verified owner)

      Yes, We will do this.

  3. Gareth Jones (verified owner)

    Hi, couple of errors on the assembly guide I’ve spotted

    Square Tower Level 1
    Parts List state rustic wooden floors but they’re stone in the diagram
    Buttress quantities are switched. Should be 4 off #8 and 2 off #9

    Also on the round tower ground & first floor stairs it really bugs be that the stair floor is wood at the bottom but the rest of the floor is stone. Any chance of a Stairs with a stone floor maybe? if their isn’t one already.

    • Sam Campbell (verified owner)

      Thanks for that, we will get that updated. We are working on a stone floor version of the spiral stairs.

  4. Joshua Arden (verified owner)

    Hello! I’m new to the Openlock/Rampage modular pieces.

    If I wanted to print and build just the exterior of larger Clorehaven buildings, I’m guessing I could just skip the floor pieces and staircases? If I’m willing to just use CA glue perhaps?

    The assembly would seemingly be more precarious, but would the finished hollow building be too fragile to be worth the time and PLA saved by skipping the interior pieces? Thanks!

    • Sam Campbell (verified owner)

      Floor pieces really help with keeping the buildings rigid. You can probably skip the stairs, but I would definitely print the floors to give that cross bracing support if you want to glue. Plus the floors don’t really take too much time to print.

  5. icristian.hrimiuc (verified owner)

    Could you have a close look at “G-Wall-Support-Bridge-Convertor-v1.0”? I have not yet printed it but there seem to be floating pieces that would definitely cause a failed print. My layer height is 0.12 which is a bit low but I have had no trouble with other parts except for this one and it is giving me headaches.

    • Sam Campbell (verified owner)

      Thanks, we’ll get this updated.

  6. scheich-dicken_moerv (verified owner)

    Is there a list which parts i have to print and how often i need them ?
    I’m also missing some parts that i see on the pictures above, but aren’t in the folder.
    Like the curved Wall without a balcony and the curved wall with the window.

    I bought the Kickstarter campaign. Where do i find them ?
    It would make printing much easier if there would be a list with all the parts needed and where to find them (or if they would be in the folder right away).

  7. davegamer1000

    Hi, will this ever be available as a stand alone file instead of having to buy the other kits to use bits from?

    Thanks in advance.

    • Nicholas Jebson

      Hey Dave, we didn’t have any plans to create individual bundles for the various Clorehaven sets, though we could look at doing this in the future.

  8. MJJEPPER (verified owner)

    Are there top locking versions of the plan schist and tudor G walls?

    • Nicholas Jebson

      We did not end up putting top locking pins on those pieces, though it is something we should look at updating. Thanks for pointing that out.

  9. jorge prieto (verified owner)

    Have you thought about specifying in the main description and not just in the small one below that the item is unusable without the rest of the collection? Item completely useless if you don’t spend the money to buy the complete collection. $ 14.95 lost

    • Mike

      Hi Jorge,

      Thanks for pointing this out, the description will be updated very shortly. Could you please email [email protected], and we’ll sort out some store credit for you.

  10. getemmurph

    Hello, so I have recently purchased several of your Clorehaaven sets to use as they seem to be the best that I’ve come across. In this set in particular I really need the G-Tudor-Bridge-Converter as a Schist peice! I’ve searched extensively through all the other sets and can’t seem to come up with something similar. What would it take to make that happen? I know you guys are super busy right now with the kickstarter but figured I would ask.

    • Jo Boorer

      That’s a great idea. I have just added that to our models update list.

  11. Doc Webb (verified owner)

    Hello! Was there ever a straight wall bridge converter added to this set (or does one exist in any of your other sets)? Loving the pieces and the utility of the bridge, but it would be great to add them to flat-fronted buildings as well. Thanks!

    • Jo Boorer

      This part does not exist yet but will add it to the suggestion list.

Add a question
©2024 Printable Scenery. Website by Vienna & Bailey