Dome Spires

$4.95

Any sales taxes will be calculated in the checkout.

The Dome Spires pack contains two models. One that can be used at the top of a simple tower, and an option set on an E-tile that can be used along with other OpenLOCK tiles. The Dome Spires can be used to cap off smaller towers rising from the main building of the cathedral. Alternately, they can be used as free standing Gothic-style towers, independent of cathedrals and allowing for even more Gothic inspired creations.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the Gothic Cathedral

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

The pride of every Gothic cathedral, a spire shows the depth and strength of worshippers’ faith. Often it as seen that the more ornate or large the tower adornments, the greater the deity must be. This leads to increases in followers and money, leading to ever more elaborate constructions.

Notes for Dome Spires:

To create an image as shown in the Gallery pic, you will require Cathedral Walls.

Right-click on the image below and “Save As” to download the reference sheet for this pack.

Product measurements can be found in the image gallery.

Additional information

Recommended Printer

FDM or resin printer

Terrain Tinker

Available

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, Prints without Supports

Scale

32mm Heroic & OpenLOCK

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Sci-Fi Gothic Assembly Guides

Posted on May 26, 2020July 23, 2025 by Nicholas Jebson

Below you will find instructions for assembling an awesome tables worth of terrain using the Sci-Fi Gothic and Daemon terrain sets, perfect for Warhammer 40K and future dystopic wargames. If you have print fails during the process of creating the ruins do not worry, they are ruins! Eagle eyed people will notice that there are… Read more

3 Comments

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments