Rampage Pre-Configured Castle CNR Tower

$14.95

Any sales taxes will be calculated in the checkout.

The Castle Cnr Tower is designed to be combined with the Castle Mid Towers and Castle Gate and Walls.

Rampage Pre-Configured Castle is a Mashups from existing Rampage tiles.

They have been combined in the 3D Application so that they will print as solid levels.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Additional information

Recommended Printer

FDM or resin printer

Infill

100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength

Layer Height

0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

Supports

requires supports for resin printing, FDM Prints without support

Scale

32mm Heroic & OpenLOCK

Name

Millimeters mm

Ratio

Scale %

10mm Wargames & N Scale

1:159

31.3%

15mm Wargames

1:116

46.9%

HO Scale

1:87

62.5%

OO Scale

1:76

68.8%

28mm Wargames

1:62

87.5%

32mm Heroic & OpenLOCK

1:54

100.0%

How to build 3D Printed OpenLOCK doors

Posted on May 14, 2026May 14, 2026 by Sloane Dougherty

In this article, we’ll cover three different OpenLOCK doors and how to build them. The three types are the sliding door, the hinged door, and the hinged door with the stone cap. Each has its own advantages, but all go together easily. Sliding Door These kinds of OpenLOCK doors are the easiest; all you need… Read more

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

2 Comments

Removing supports from the OpenLOCK ports

Posted on November 30, 2024April 17, 2026 by Sloane Dougherty

In this article, we’ll show you how we go about removing the small supports that are printed on all OpenLOCK model ports. These small supports are printed to support the overhangs in the OpenLOCK port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. For this, we recommend using… Read more

6 Comments