$4.95
The Oak Trees come in different variants than can be scaled to provide various size trees. The branches print without supports on standard FDM printers and, if heated, can be bent into different shapes. To add leaves, we suggest preserved moss or clump foliage.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
As it is a crime to fell one of his majesty’s oaks, these beautiful trees lend their splendor to the outlying farmlands leading up to the city’s great castle. Though a welcome shade for those tilling the fields, the shelter of their bows can also be a nest for poachers.
Notes for Oak Trees STL:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, 0.1 high quality on FDM printers |
| Supports | requires supports for resin printing, Prints without Supports |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
In a previous post we covered how to paint the stone walls from the Country and King buildings. This article shows you how to paint medieval textures used on the terrain. In particular, the wood, roof tiles, wattle & daub, and hay. Wood & Roof Tiles After undercoating, basecoat the Wood with Oak Brown and… Read more
You must be logged in to post a question.
astromedia.only –
I suppose those were not made deliberately compatible with “Gnarly Trees With Canopies” canopies? Any plans on adding canopies to these? … I liked the fully printable trees not requiring additional materials and would love some more variety 🙂 (some conifers or what is the word would be nice too eventually or even some whole vegetation package – never enough of that 🙂 )
Jo Boorer (verified owner) –
Thanks for your suggestion.
I will add this to the customer wish list.
We do have some new trees coming out shortly with canopies from our last Kickstarter.
Robin Ovens (verified owner) –
My slicer tells me that there is floating areas so I enabled supports. Are these meant to print fine if i turn them off?
Joanne Boorer (verified owner) –
These printed fine on our FDM printers without supports required. Some printers may have minor stringing but these are easier to remove than supports.