The Stone Ruins

$29.95

Any sales taxes will be calculated in the checkout.

The Stone Ruins are a collection of 107 modular stone ruin sections. These dungeon ruins are designed for RPG players who want to add a new dimension to their games. We recommend pairing them with our range of Dungeon and Cavern tiles to make a truly spectacular raid.

These have been designed to print at .2 micron (without supports) and infill set to 10%.

This product is part of the APOC Stone Ruins

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Though the city had long been just a pile of crumbling stones on the hillside, the observant could see the outlines of the grand buildings. The even more observant could find treasures hidden within the rubble, forgotten relics dropped in the race to evacuate.

Updates:

31 July 2017 (version 5.1) Small mesh repairs made.
25 May 2018 (version 5.2) Separated the Brick Ruins from the Stone Ruins.

Notes for The Stone Ruins:

Right Click and “Save As” to download the reference sheet below.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Dimensions	Dimensions and weights are available in the image gallery
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Mitch Cowan (verified owner) – September 30, 2016

Walls sections 49 through 55, are those scaled down but larger area files? If so, what is the converion to scale them up to match the other regular sized sections? Thanks
- Matthew Barker – October 1, 2016
  
  Those parts are the handrails from the Docks are scaled to be the same as the other 50.8 tiles. You could scale them up to be building parts by scaling x2. I never thought of that, but it would work.
Mitch Cowan (verified owner) – December 21, 2016

Thanks. I did try but the scaling is still off and the thickness especially didn’t work. With the new Openlock system, I’ll be using that instead, once it is released. Thanks!
uofdoom – March 1, 2017

If I wanted multi-floor ruins, would I be able to use just this set, or would I need another set for the lower non-ruined floors?
- Matthew Barker – March 2, 2017
  
  These are just the ruin sections, you can find the complete sections here https://www.printablescenery.com/product/winterdale-2-docks
Justin Millikan (verified owner) – March 23, 2017

Hi Matt, I’m looking for the ruins for the Turret Cuppola. They appear in the main pic for this set but I can’t spot them. Any advice?
- Matthew Barker – March 24, 2017
  
  The Ruins for the Round Tower are in this download. There are two folders in the Zip File. The Ruins are in APOC Stone Ruins 2 STL Folder.