$4.95
The Stalingrad Ruins 2.0 pack contains a set of pre-configured Stalingrad ruins, which are designed to be printed in three sections.
The Stalingrad Ruins 2.0 set is designed to fit in with the Stalingrad Ruin sets A, B, C ,D, E and F. The scale is set to 15mm for games such as Flames of War. However, they can be re-scaled to 28mm to be used with games like Bolt Action.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Intact buildings were a rare sight in Stalingrad, the furious fighting leaving every structure damaged in some manner.
Notes for Stalingrad Ruins 2.0:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, FDM Prints without support |
| Scale | 15mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 66.7% |
| 15mm Wargames | 15 | 1:116 | 100.0% |
| HO Scale | 20 | 1:87 | 133.3% |
| OO Scale | 22 | 1:76 | 146.7% |
| 28mm Wargames | 28 | 1:62 | 186.7% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 213.3% |
| - |
You must be logged in to post a question.
Barrie MacDonald –
Hi Matt
Are the 15mm Stalingrad Buildings capable of being upscaled to 28mm? I appreciate some slicing might be needed, or is it in the “to Do” list to make 28mm versions and some stage.
Cheers Barrie
Matthew Barker –
You can scale them up but you will need to cut them into smaller pieces before printing. This is on our to-do list.
However, you can also do this yourself in meshmixer is you need it right at the moment
lazette2011 –
At 15mm scale, what are the overall dimensions of the printed piece? Thanks!
Matt Barker –
I have updated the product images to show the sizes of the prints
dale –
Will they scale down to 6mm.
Sam Campbell –
They will scale down to 6mm, you will need a small nozzle and print at finer resolution to get good prints.
madjackflint (verified owner) –
As others have said for these Stalingrad packs, they are oversized for traditional 15mm tabletops…rather almost spot on for 20mm. That said, still great files, I personally just scale them done 70% and they fit perfectly with the rest of my terrain.
madjackflint (verified owner) –
Correction: these pieces are in scale with Battlefront prepainted terrain (Flames of War/Team Yankee)… they play scale fast and loose but it looks good, and these look good with them