$12.95
Baba Yaga’s Cottage is a fantastical building designed for use in tabletop or role-playing games in a historical or fantasy setting. based on the Slavic folktale, Baba Yaga’s cottage wanders in circles on large chicken-like feet. A great piece to have a witch inhabit in your fantasy RPG’s.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
“ahhh, that would be my first sister. No I do not know where the portal rests, but my third sister; Baba Yaga, will. Seek her cottage deep in the forest. Trust me, you will know it when you see it!”
Updates:
Notes:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 10% for FDM printing, 100% for resin printing |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Requires supports on some files |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
This guide is focussing on creating an aged, weather-worn look to an old cottage you might find in a forest. The bird legs are a bit more exotic and inspired by the skin tone of an ocellated turkey! Whilst the end result might look complex it’s actually quite easy to achieve! The cottage utilises drybrushing… Read more
You must be logged in to post a question.
frederik (verified owner) –
Can you give some help on how to print the feet? Would you turn them upside down with support?
Nicholas Jebson (verified owner) –
Are you looking to print them with an FDM or a resin printer Frederik? if Resin we would probably say rotate them to a 30 degree angle from the bed and generate supports, for FDM they should print perfectly fine feet flat on the build plate.
Ramo (verified owner) –
Can you make the LV 1 and roof in 2 halfs so smaller printers can print these in full size.
Nicholas Jebson (verified owner) –
We can certainly add that to the updates Ramo.
dtricardo (verified owner) –
Hi
I was wondering if you can provide a file with only the stove pipe on the rooftop. For some reason the whole model printed perfectly (Ender 3 pro), but the stove top. It was oddly under extruded and warped. I’ve seen other people have similar issues and think this would be very helpful.
Thanks
Mike –
Thanks for the feedback. We will add that to our list of model updates to be done in the near future
Adrienne Jones (verified owner) –
Hi,
I’m currently printing this using the small printer files with a resin printer (Mars 3 Pro). I’ve been printing the main pieces and they are coming out great, but I’m not sure how the feet, roof decorations, roof insert, and door should work. Do I just print these using the original files, or do you have instructions for scaling them down so they will work with the small printer file dimensions?
Jo Boorer (verified owner) –
The parts you mention should print fine at the original scale. They will just need to be rotated and put supports on.
Adrienne Jones (verified owner) –
Great! Thank you!
gareth Meijsen (verified owner) –
Hi
I want to know if i should print any of the pieces on my Fdm with supports or is it a plug and print situation?
Matt Barker –
Hi Gareth, Yes FDM printing without supports if fine as this prints without supports. Only the small ‘Decorations’ pieces will need supports to print. I would use a brim on all the parts when printing to help with build plate adhesion.’
Hanna Lemoine (verified owner) –
Printed this with my phrozen sonic mini 8k and it came out amazing! Most of the small printer stls were perfect. The only one I needed to split in half was one of the roof pieces. I actually printed this for my halloween village and its so perfect. Im obsessed ❤️
Joanne Boorer (verified owner) –
Thanks for your feedback.
Derrick Ladrach (verified owner) –
I just downloaded the files, but the feet seem to be missing?
Derrick Ladrach (verified owner) –
Nevermind, issue resolved
Matt Barker –
Awesome, Sorry I was slow to reply 🙂