‘Old School’ Floor Adaptors

$2.95

Any sales taxes will be calculated in the checkout.

The Old School Dungeon Tile floor adaptors are designed so that you can make an ‘Old School’ dungeon tile (characterized by the floor being attached to the wall) with our OpenLOCK tiles. This allows compatibility with other systems such as Dwarvenforge and the old Openforge dungeon tiles.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

This product is part of the Rampage Complete Dungeon

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

This corner seems different to those you’ve seen in the past hour, but somehow familiar. Almost as though you’ve passed by here before…

Updates:

29 May 2018 (version 4.0) Updated to the latest version of Triplex

Notes for ‘Old School’ Floor Adaptors:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
File Type	STL files in ZIP folder
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Print Volume	100mm x 100mm x 100mm print build volume required
Supports	requires supports for resin printing, Prints without Supports
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

garrett.carson – September 15, 2017

Are there/will there be more of these adapters? I would absolutely love these adapters in the style of each of the floor packs
- Matt Barker – September 15, 2017
  
  Yes we will be adding these adapters for all the floor sets once the Kickstarter campaign closes