Ruined Warehouse

$14.95

Any sales taxes will be calculated in the checkout.

The Ruined Warehouse is a Caribbean styled port building that can be used for a fantasy or historical setting. It is an ideal skirmish building, as it has easy access through the broken walls for mini placement and great areas for combat and cover.

For extra flexibility, this has been designed to be compatible with the The Warehouse, so that parts of the warehouse can be switched out mid-game, to visually represent damage.

The warehouse will print in three parts without supports. There is an option with smaller parts for smaller printers.

This product is part of the Port Winterdale

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

This is what happens when you let a Fire Mage help with the interior decorating

Notes for Ruined Warehouse STL :

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Reference sheet for medium printers

Reference sheet for small printers

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Davemartin1990 (verified owner) – May 5, 2020

Hello. I am printing on a Prusa Mk3 and using prusaslicer and I was able to print the first floor using the 4 small printer parts and it looks great. Once I tried to print the second floor as one part all was going well for the first 6 or so hours until it seemed my PINDA sensor got caught. I tried moving it and that started a lot of different errors. I was wondering if this was my printer’s fault or my slicers?
- Sam Campbell – May 5, 2020
  
  It could be either, a useful thing to do is to redownload, re-orient (Rotate 90° on build plate) and then re-slice. This can mitigate against any local or idiosyncrasies that some printers can develop.