Name: Winterdale Bend Wall
Brand: Age of Sigmar
Availability: InStock

Winterdale Bend Wall

$4.95

Any sales taxes will be calculated in the checkout.

The Winterdale Bend Wall pack contains all the pieces needed to make a curved wall section. The pack is compatible with the Winterdale Wall Pack.

All models in this pack print without supports, and it also includes a variant without skulls. Small printer parts are also included.

The Winterdale buildings are designed to be glued and placed together.

This product is part of the Winterdale Complete

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Sweeping curves at the corners of Winterdale’s citadel speak of the hours and gold pieces poured into its construction. But despite its beauty, the stonework on these walls is just as formidably tough as any other point of the battlements. And just as heavily guarded.

Updates:

(version 5.1) Includes option to print as two pieces.
(version 5.2) Includes the wall extension.
27 July 2017 (version 5.3) Small mesh repair to WinterdaleCitadel_Wall_Ext_Bend_5.1-PART2.
8 November 2018 (version 5.4) Adjusts made to WarBridge_Bend_Wallv1.1 and WinterdaleCitadel_Wall_Ext_Bend_5.4. Two more battlement options were added.

Notes for Winterdale Bend Wall:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Winterdale Bend Wall Reference

Winterdale Bend Wall Small Printer Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

Ron Weaver – October 24, 2018

Where can i find the crenelations for this curved wall section?
- Matt Barker (verified owner) – October 31, 2018
  
  HI, we are updating this pack today and will recheck all the dimensions