Name: Winterdale Citadel Side Stairs
Brand: Age of Sigmar
Availability: InStock

Winterdale Citadel Side Stairs

$5.95

Any sales taxes will be calculated in the checkout.

The Winterdale Citadel Side Stairs are compatible with all our citadel towers and walls.

The models print without supports and include a option without skulls, as well as pieces for smaller printers.

If you want these to work with the wall you will also need the Winterdale Crenellations.

The Winterdale buildings are designed to be glued and placed together.

This product is part of the Winterdale Complete

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Within moments of the sentry’s trumpeting, huge numbers of Winterdale’s Guardsmen pound up the stone stairs to the battlements. Disciplined and well-drilled, they can man the entire length of the walls within a minute or two.

Notes for Winterdale Citadel Side Stairs:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, Prints without Supports
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Comments

steelvow (verified owner) – November 9, 2017

Where can I find the open crenelation file that connects with the stairs like in the first picture ?
- Matt Barker – November 10, 2017
  
  Crenelation Options are here https://www.printablescenery.com/product/winterdale-crenellation-options-10
Christopher.Loddo88 (verified owner) – May 7, 2020

Is there a way of getting the stairs to work if you use the wall extension so the wall lines up with the citadel gatehouse height wise.
- Sam Campbell – May 7, 2020
  
  This has been suggested a few times, we’ve added this to suggestions for future development.