Tribal Cells

Name: Tribal Cells
Brand: Age of Sigmar
Availability: InStock

$12.95

Any sales taxes will be calculated in the checkout.

The Tribal Cells is a fantasy building that can be used for roleplaying or tabletop games. It is an ideal skirmish building, as it has easy access through platforms and bridges for mini placement and great areas for combat cover.

Only the trees can print without supports, the rest of the pieces will need to print with supports. There is an option with smaller parts for smaller printers.

This product is part of the The Lost Tribes

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

From his vantage port, Grishnak could see the entire forest. It was quiet today. He didn’t mind the quiet. That’s not to say he didn’t mind noise, either. Both were acceptable. As he settled down for a second hog shank afternoon tea break, the forest moved. Elves probably. He spat. Dropping his half-eaten snack, he picked up his horn.

Notes for Tribal Cells:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
TribalCells-Bridge-2-v1.1 and TribalCells-Bridge-3-v1.2 have filament guide holes in both sides. You will need to print multiple of these and/or drill though the filament holes and thread filament through to construct the bridge. TribalCells-Tree-2-v1.2 and TribalCells-Bridge-1A-v1.2 have filament guide holes to connect the bridge to.
Product measurements can be found in the image gallery.

Reference sheet for medium printers

Reference sheet for small printers

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Supports	requires supports for resin printing, Requires supports on some files
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	28mm Wargames

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	35.7%
15mm Wargames	15	1:116	53.6%
HO Scale	20	1:87	71.4%
OO Scale	22	1:76	78.6%
28mm Wargames	28	1:62	100.0%
32mm Heroic & OpenLOCK	32	1:54	114.3%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Building a Tribal Fort Table

Posted on August 5, 2020July 24, 2025 by Nicholas Jebson

Taking your 3D printed terrain and creating an awesome looking wargaming table is really easy. This article will focus on using the Ork & Tribal terrain to create a fantasy wargame table for use in Age of Sigmar or Kings of War scenarios. The walls in the Tribal Ramparts and Ramparts Gate sets act as… Read more

2 Comments

Comments

Michael Potter (verified owner) – December 22, 2018

So many of the parts have curved bottoms and no obvious way to print. For example, the platform has curved logs and ropes wrapped around them. The roofs are curved.

How exactly are these supposed to be printed?
- Sam Campbell (verified owner) – December 24, 2018
  
  Everything hast to print with a raft and supports other than the tree bases.
mikejay (verified owner) – September 18, 2020

Hello Guys, do you remember what settings you set the supports to?
Perhaps it’s possible to update the ‘additional info’ to say that it has to be printed with supports and with the setting information?
Kind regards
- Sam Campbell (verified owner) – September 18, 2020
  
  Supports touching buildplate. I’ve updated the additional information.