Name: Tribal Ramparts
Brand: Age of Sigmar
Availability: InStock

Tribal Ramparts

$14.95

The Tribal Ramparts are fairly large. For example, the long sections are 3” x 6” and the walkways will fit two rows of minis as they are about 2” wide.

They would also look good scaled down slightly, to fit one row of minis. To do this, scale them down to 70%. This would make the walkways 35mm wide which is ample room for 28mm mini placement (if you do this you will also need to scale down the OpenLOCK clips).

This product is part of the ADD-ON The Lost Tribes. Please log in if you backed the campaign.

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

These monstrous spiked ramparts will deter all but the most battle-crazed warriors.

Notes:

Tribal Ramparts A-G are straight sections. H is a 45 degree angle, I is an straight connecting section, L is a corner section and O is a dead end section.
Contains a Mirror folder of all parts mirrored.
Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

Infill	20%
Supports	Prints without Supports
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)

3 questions for Tribal Ramparts

Mathieu Marchand (verified owner) – June 13, 2018

As much as i love those, they are really filament hungry. One section consumes almost as much as the whole tribal tower. Is it possible to make the inside hollow, despite the open-lock connection on the sides?
- Matt Barker – June 16, 2018
  
  Yes, a hollow version may print quicker. You could also turn done the infill to 5%
Timothy Reese (verified owner) – July 6, 2018

Love these designs. If you ever come back to this for updating, it would be great if there was a T-intersection to make best use of the O model.
- Matt Barker – July 7, 2018
  
  T Section is a great idea, I’ll add it to the to-do list
jean.rondenet (verified owner) – February 20, 2019

Same as timothy , just for push on top the demand ^^