Trench Forts

$14.95

Any sales taxes will be calculated in the checkout.

Crumbled walls of an ancient civilisation repurposed for a modern war.
A modular set of trench fort walls that uses SystemHEX to combine.
Compatible with all other Darkness & Desolation models, as well as other SystemHEX models from Throne & Ash.
Comes with seven wall options, five HEX curvatures, and two design option alternatives.

This product is part of the Trench Tombs Bundle and Darkness and Desolation (All 3 Bundles).

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Archaeological wonders and discoveries of unspeakable power led people to the dark ruins of the ancient kingdom. But it wasn’t long before these sites became the focal point of wars fought over the discoveries. Factions became entrenched in regions of ruins, barricading old walls and fortifying their positions to protect their finds.

Top down render of the Trench Forts models in the SystemHEX template

Updates:

29 September 2026 (version 1.4) A Fixed Terrain option has been added for those creating a permanent tabletop board.

Notes for Trench Forts 3d Print file:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.
First Published version 1.3

Trench Forts Reference

Adaptors

Trench Fort Adaptors Reference

Fixed Terrain Option Reference

Fixed Terrain Options Reference

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 15%
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Scale	32mm Heroic & OpenLOCK
Supports	requires supports for resin printing, FDM Prints without support

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

How To Paint The 3D Printed Trench Walls from Darkness & Desolation

Posted on July 28, 2026July 28, 2026 by Sloane Dougherty

In this article, we’ll show you how to paint the 3D printed Trench Walls from our Darkness & Desolation campaign. We’ll cover the paints needed, the techniques we used, and any tips along the way to get your Trench Walls ready for the tabletop. The methods in this guide can be used on all of… Read more

Comments

pgord1 (verified owner) – August 6, 2026

Is there an adaptor that acts as an end piece?
- Joanne Boorer – August 7, 2026
  
  The end pieces in the Ruined Trench Forts are compatible with the Trench Forts.
Zachary Schley (verified owner) – October 11, 2026

I didn’t see any end pieces that match the ‘clean’ design of the Trench Fort set. Are there any end pieces for the Trench Fort set that are not ruined (ie, from the Ruined Trench Fort set)? Humble request, any chance a few of these ‘clean’ end pieces could be designed and added? Thank you for your consideration.
-Zach
- Joanne Boorer (verified owner) – October 12, 2026
  
  Thanks for your request. I will add this to list.
Zachary Schley (verified owner) – October 17, 2026

I’ve noticed on each of the Trench Fort Adaptors there is a ‘letter’ in a circle on one side. On that same side is a cut out slot in the shape of a half ‘X’. Is there a piece that I can print that goes into this slot to connect two end pieces? If there is such a piece, what is the name and where can I find that file? None of the Trench Tomb files that I have downloaded thus far has any such file. Thank you.
-Zach
- Joanne Boorer (verified owner) – October 19, 2026
  
  The Trench Fort adapters are made to connect the Trench Forts to Trench buildings. Like the A-Adaptor connects to the Shrine of Damnation https://www.printablescenery.com/product/demonic-shrine/
evan.obrien1 (verified owner) – October 21, 2026

This set is great but it really needs end pieces!
- Joanne Boorer (verified owner) – October 22, 2026
  
  I will add your request to the update list.
Walter Silence (verified owner) – October 24, 2026

What does the G Adapter attach to?