The Small Square Tower Mash Up

Name: The Small Square Tower Mash Up
Brand: A Song of Ice & Fire
Availability: InStock

$14.95

Any sales taxes will be calculated in the checkout.

The Small Square Tower Mashup has been made from existing Rampage tiles.

The model has been combined in a 3D application so that it will print in solid levels.

You can construct these from previous collections.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.

Description

Towers such as these are easy to maintain and relatively quick to build, perfect for a series of wilderness watchtowers.

Notes for The Small Square Tower Mash Up:

Right Click and “Save As” to download the reference sheet below.

Additional information

Recommended Printer	FDM or resin printer
Infill	100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Supports	requires supports for resin printing, FDM Prints without support
Scale	32mm Heroic & OpenLOCK

Use this tool to find the percentage needed to scale your model up or down when printing.
The highlighted row shows the model's current scale and other rows show what percentage to print at to reach that scale.
To set a custom scale, use the calculator in the bottom row.

Name	Millimeters mm	Ratio	Scale %
10mm Wargames & N Scale	10	1:159	31.3%
15mm Wargames	15	1:116	46.9%
HO Scale	20	1:87	62.5%
OO Scale	22	1:76	68.8%
28mm Wargames	28	1:62	87.5%
32mm Heroic & OpenLOCK	32	1:54	100.0%
			-

mm is the height based on the measurement from the bottom of the feet to the eye height of the average human
Height is not the same as Base Size (A 28mm miniature will often have a 25mm round base)

Creating Magnetic Dungeon Tiles with OpenLOCK

Posted on July 21, 2025July 22, 2025 by Sloane Dougherty

This article will show you how to use the OpenLOCK Magnetic Clip to build fully interchangeable dungeons with magnets. Once you’ve built a collection of these magnetic clips, you can swap and change dungeon layouts in no time. The Magnetic Clip is an OpenLOCK adapter option. It is interchangeable with other OpenLOCK clips but is… Read more

Removing supports from the OpenLOCK ports

Posted on August 24, 2017July 22, 2025 by Dee Barker

Horizontal OpenLOCK ports print with small supports to support the overhangs in the port mouth. You need to remove these supports post-printing before you can insert the OpenLOCK clips. We recommend using some needle-nosed pliers for this task. You can use the pliers to grip and twist the two supports in each port, breaking them… Read more

6 Comments

Comments

dburke9000 (verified owner) – July 9, 2020

Is the front door on this tower supposed to open? I just printed the first floor of this tower and noticed the door looks like it could be cut out and opened, but didn’t know if it was just a small gap in the print or if I’m supposed to cut there to make the door open
- Sam Campbell (verified owner) – July 9, 2020
  
  The front door has in built printer supports you can remove with clippers.
Adrian JEQUEL – August 16, 2020

Hi ! could you tell me the size of different parts please ?
- Sam Campbell (verified owner) – August 17, 2020
  
  Sure, We’ll get that information uploaded.
miguelglzch72 – June 9, 2024

Hello, I would like to know if this towers can connecto to the openlock walls, I mean, these towers can be observation tower on every corner, but when in the model pictures I don’t see where the connector can be placed.
- Joanne Boorer (verified owner) – June 10, 2024
  
  Thanks for your inquiry.
  You can use Terrain Tinker to create the design you described using the Rampage Castle bundle.
  https://www.terraintinker.com/