My Account 
Description
The Tavern dominates the tiled district of the wizards. Built upwards instead of out, the Tavern has rooms, food, and drink for the weary traveler.
Three versions of the Hagglethorn Tavern are included with this download:
- The main model with sculpted cuts for printers with a print bed size of 200mm X 200mm
- A folder named “Small Printer” containing cuts for printers with a print bed size of 120mm X 120mm
- A folder named “Complete” with an uncut version for larger printers and scaling down purposes
Notes:
- Right-click on the image below and “Save As” to download the reference sheet for this pack
- Product measurements can be found in the image gallery
- Copyright Printable Scenery under license from Tabletop Troubadour Games
- First Published version 1.6
CircuitRyder (verified owner) –
how large of a print bed is needed to print the “complete” model at normal scale?
Mike (verified owner) –
Hi CircuitRyder,
You would need a print bed size of 307mm X 236mm X 218mm to print it complete at the same scale.
Kheldras (verified owner) –
This is such a gorgeous house… i just wish the 2 levels in the roof (The wooden one,. and the one the Balcony leads to), had interiours too… so, its just 1 Mega massive block. Sadly, like most of the Hagglethorn houses.
Is there any this this gets interiors in the “roof” area?
Mike (verified owner) –
Hi Kheldras,
The Tavern will have its interior exposed with the ruined version but the complete ones are enclosed as per the original design
Kheldras (verified owner) –
I know, Mike, i own them too. But thats why i ask. Will such a design for the upper floors ever happen?
Mike (verified owner) –
Currently, there aren’t any plans to add interiors to the bigger buildings. However, we always take on feedback and will add it to our list of possible model updates for the future.
madwalrus (verified owner) –
Is there a assembly guide for this? I am in the process of putting it together and i cant seem to find the right location for the roof sections to sit on the middle of the tavern.
Mike (verified owner) –
Hi Madwalrus,
Is that for the small printer cuts? The normal cuts have all the floors together. We can look at putting together a diagram that should help
meakmarr (verified owner) –
What are people averaging print speed wise on the larger complete parts? I’m getting quotes of 3ds for 10%infil at 50mms .12 later with .4 nozzle.
Jo Boorer –
This sounds right for the Hagglethorn range as they take longer than our other Printable Scenery models as these are based on hand sculpted models.