$2.95
These ‘Stackable Rocks’ are all set to the same height so can be arranged in various ways to create … ‘Rocks’ of various sizes.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Hiding behind a ‘Rock’ is a great tactic often used to prevent oneself from being shot.
Updates:
Notes for Stackable Rocks:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Layer Height | 0.05 high quality on resin printers, .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Supports | requires supports for resin printing, Prints without Supports |
| Raft | Switch raft ON to help print bed adhesion |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
You must be logged in to post a question.
Brandon Woodward (verified owner) –
What would you suggest as a brim size for this?
Printing rocks 02 and 03, first with no brim and all the outer column pieces fell during printing.
Printing again now with a 3mm brim which seemed to do well except for one piece on rock 02, one edge piece has fallen over mid print.
Trying to find a good middle ground of brim size and using least material possible.
Matt Barker –
If you use a raft it will help with bed adhesion