$12.95
The Rune Stones are a set of 3 statues that can be printed as stand-alone pieces or together with a circular base. The base has 2 versions, including one with an altar at it’s centre. The Rune stones print well in both resin and FDM and come pre-supported for resin printing.
This product is delivered as a .ZIP file pack containing 3d printer files (STL files) for use on a home 3D Printer.
Scattered throughout the perilous quagmires of the Gloaming can be found the ancient carvings of a long-forgotten folk. Grim figures carved into peculiarly placed henges hint at some hidden enchantment to be unlocked by the right adventure.
Notes for the Rune Stones STL:
| Recommended Printer | FDM or resin printer |
|---|---|
| Infill | 100% for resin printing, 10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength |
| Supports | pre-support version included in download., Prints without Supports |
| Layer Height | .2 for Normal Quality .1 for High Quality (.2 Layer height is recommended) |
| Scale | 28mm Wargames |
| Name | Millimeters mm | Ratio | Scale % |
|---|---|---|---|
| 10mm Wargames & N Scale | 10 | 1:159 | 35.7% |
| 15mm Wargames | 15 | 1:116 | 53.6% |
| HO Scale | 20 | 1:87 | 71.4% |
| OO Scale | 22 | 1:76 | 78.6% |
| 28mm Wargames | 28 | 1:62 | 100.0% |
| 32mm Heroic & OpenLOCK | 32 | 1:54 | 114.3% |
| - |
All of the 3D printer models from the Gloaming Swamps and Wilderness Kickstarter are now available to download and print. Throughout the campaign, we have been creating painting panels for each 3D printer model as it became available. We are pleased to present them all to you here in one place, along with a few… Read more
You must be logged in to post a question.
Allan Begolo-Wyatt (verified owner) –
Just wanna say I’m floored by how well these models printed up. I’m extremely critical of my prints and like my scenery to be as close to visually layerless as possible. Printed one of these chaps up on a whim on my pretty long in the tooth Ender 3 (it has a new part cooling fan and motherboard, but it’s otherwise stock) with a .4 nozzle at 0.12 layer height (Cura sliced), and it’s pretty much perfect. Good job guys!
Jo Boorer (verified owner) –
Thanks for your great feedback 🙂