Name: Stone Stairs
Brand: Dungeons and Dragons
Price: 4.95 USD
Availability: InStock

Stone Stairs

$4.95

The Stone Stairs set allows you to make solid stairs in your dungeon or building, that are compatible with all of our OpenLOCK products.

Download the Rampage Base Pack for free to get the latest version of the OpenLOCK clip.

If you are a Kickstarter backer you must login to access your pledge

This product is delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

Description

Set into the wall ahead, the sturdy stone steps are a welcome sight, after hours of trying to find a way back up. Hopefully there won’t be any nasty surprises at the top of them.

Updates:

20 June 2017 – Small Mesh repairs to E-A-RPG-StoneStairs-V1.6.
4 May 2018 (version 3.0) Updated to Triplex
18 July 2018 (version 4.2) S tile Stairs added

Notes:

Right-click on the image below and “Save As” to download the reference sheet for this pack.
Product measurements can be found in the image gallery.

Additional information

File Type	STL files in ZIP folder
Infill	10% to 15% for most parts but increase to 20% for thin upright parts such as door frames for added strength
Layer Height	.2 for Normal Quality .1 for High Quality (.2 Layer height is recommended)
Print Volume	100mm x 100mm x 100mm print build volume required
Supports	Prints without Supports

3 questions for Stone Stairs

John Fallara (verified owner) – April 22, 2017

Are you planning to add 1-tile wide (5-foot) versions of these stairs?
- Matthew Barker – April 23, 2017
  
  Yes we are making a new stair system for the Rampage Castle and also upgrading this one which will include a 1 inch wide version
mikekannard (verified owner) – September 8, 2020

Can these be updated with the newer bottom with the x support? I like to print my floor tiles on the side and the X is required for support-less printing.
- Sam Campbell – September 8, 2020
  
  We’ll have a look into but these wont print on their side without supports for the side detail anyway.
mikekannard (verified owner) – September 11, 2020

Hello! Thanks for the previous response! I just wanted to add that I printed the E-A on it’s back and the only supports I had to add were for the base since the back goes pretty flush with the side of the tile.